Programmable Doorphone - Panasonic EASA-PHONE KX-T30810 Installation Manual

:.'-----.-'----'----'---.-.-~ AB= [-?+I:
to assign the same on all 8 extensions
1 ..II..[::,~
I~_.____________
until the desired combination appears
D-PHONE 1, 2 . I . . . . . defauh (aa 8 extensions)
D-PHONE I
D-PHONE 2
D-PHONE * * 5 (deny the ringing)
I
[22] [NEXT] [riB] [SELiCT] [MEMORY] [END]
;;;] [NEXT] [NE?T] [SELECT] [MEMORY] [END]
~-----until the desired extension number appears
Allows each extension to be programmed for
receiving calls from up to 2 doorphones.
A doorphone is option.
s
Dial (22).
"DOOR PHONE RCV" will be displayed.
. Press the NEXT button.
"ENTER EXT NO" will be displayed.
3. Press the NEXT button.
"11: D-PHONE 1, 2" will be displayed and
"1, 2" will blink.
. Repeat pressing the SELECT button until the
desired combination
of
doorphones (which
are to be connected to that extension) is
displayed.
5. Press the MEMORY button.
The blinking LCD will stop.
, Repeat steps 3 to 5, to program the combina-
tion
of
the other extensions.
When you start the programming from step I,
you may dial the desired extension number
instead
of
the NEXT button at step 3.
The PREV button allows you to go to the
previous extension for displaying the door-
allow extension 12 to receive from D-
PHONE 2
[22] [NEXT] [12] [SELECT] [SELECT]
[MEMORY] [END]
7. To return to the initial program mode, press
the END button.
e
See page
5-16.
2-30