Miele T 7634 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Dryer
  5. T 7634
  6. Operating instructions manual

Miele T 7634 Operating Instructions Manual

Vented tumble dryer
Hide thumbs Also See for T 7634:
Table of Contents

Advertisement

Quick Links

Operating instructions

for vented tumble dryer
T 7634
en - GB
To avoid the risk of accidents
or damage to the appliance
it is essential to read these
instructions before it is installed
and used for the first time.
M.-Nr. 07 856 790

Advertisement

Table of Contents
loading

Related Manuals for Miele T 7634

Summary of Contents for Miele T 7634

  • Page 1: Operating Instructions

    Operating instructions for vented tumble dryer T 7634 en - GB To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 07 856 790...

  • Page 2: Caring For The Environment

    Caring for the environment Disposal of the packing Energy saving tips material To avoid unnecessarily long drying times and high consumption of energy: The transport and protective packing has been selected from materials which – Make sure that your laundry is are environmentally friendly for disposal thoroughly spun before drying.

  • Page 3: Table Of Contents

    Contents Caring for the environment ......... . 2 Warning and Safety instructions .
  • Page 4 Contents Installation and connection ........34 Front view.

  • Page 5: Warning And Safety Instructions

    Any other usage is not supported by the manufacturer and could be dangerous. Miele cannot be held liable for damage resulting from incorrect or improper use or operation.
  • Page 6 Warning and Safety instructions The tumble dryer can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, if they are are supervised whilst using it or have been shown how to use it in a safe way and understand the hazards involved.
  • Page 7 (e.g. danger of overheating). If the electrical connection cable is faulty it must only be replaced by a Miele approved service technician to protect the user from danger. Unauthorised repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability.
  • Page 8 Warning and Safety instructions Faulty components must only be replaced by genuine Miele original spare parts. Only when these parts are fitted can the safety standards of the tumble dryer be guaranteed. The tumble dryer must be isolated from the electricity supply in the event of a fault and during cleaning and maintenance.
  • Page 9 Warning and Safety instructions Correct use To prevent the risk of fire, the following textiles must not be dried in this appliance: – items which have not been washed. – items, such as workwear, which have not been thoroughly cleaned and which are still soiled with grease, oil or other deposits (such as cosmetics, lotions etc).
  • Page 10 Warning and Safety instructions Danger. This tumble dryer must not be connected to a controllable socket (e.g. a timer switch or a peak load shut-off device). If the dryer programme were to be interrupted before the end of the cooling down phase, the laundry could self-combust. To prevent the risk of fire, the following must not be tumble dried: –...
  • Page 11 Warning and Safety instructions The tumble dryer must not be used without the fluff filter in place or if the fluff filter is damaged in any way. The fluff filter must be cleaned regularly. The dryer must not be used without vent ducting in place. The dryer must not be connected to a chimney or vent flue which is in use.
  • Page 12 Dust drawn into the tumble dryer can cause blockages. The tumble dryer must not be hosed down. Accessories Only use genuine Miele original spare parts and accessories with this tumble dryer. If non-Miele parts are used, guarantee, performance and product liability claims may be invalidated.

  • Page 13: Operating The Tumble Dryer

    Operating the tumble dryer Control panel Display Low temperature button See next page for details Delicate fabrics are dried at a lower temperature. Delay start button Drying level button This button is used for: with indicator lights to show the level - Selecting the duration of the selected Warm air and Cool air...
  • Page 14 Operating the tumble dryer Display In the same way, the Woollens handcare, Silks handcare and The following are selected via the Smoothing programmes can finish display: earlier than expected if a certain – Delay start temperature is reached. This can happen with particularly fine fabrics, –...

  • Page 15: Notes On Laundry Care

    Notes on laundry care Care symbols – Down-filled garments have linings which have a tendency to shrink, Before drying check the drying symbol depending on the quality of the item. on the care label. If there are no They can be partially dried using the symbols, dry at your own risk! Smoothing programme.

  • Page 16: How To Dry Correctly

    How to dry correctly Brief instructions Load the tumble dryer ^ Press the Door button to open the The headings numbered ( , ...) show the operating sequence and can door. be used as a brief guide to using your ^ Load the laundry loosely into the dryer.
  • Page 17 How to dry correctly Select a programme Important: Please note that the programme duration shown in the display will vary according to the programme selected (see "Programme duration / Estimated time remaining"). You cannot alter the drying level of the Woollens handcare and Smoothing programmes.
  • Page 18 How to dry correctly Start the programme Remove the laundry when the programme has finished The Start/Stop button will flash when a programme is being selected. The 0 and Finish will appear in the display flashing indicates that a programme to indicate that the programme has can be started.

  • Page 19: Extra Options / Delay Start

    Extra options / Delay start Low temperature – If you keep the Delay start button pressed in, the time will continue to increase up to 24^. For all delicate or minimum iron fabrics with the r symbol on the To begin delay start care label (e.g.

  • Page 20: Programme Chart

    Programme chart Cottons Max. load 6 kg* Extra dry, Normal** Fabric type Single and multi-layered cotton fabrics such as towelling, jerseywear, T-shirts, underwear. Notes – Select Extra dry for multi-layered and very thick fabrics. – Do not use Extra dry for loopknit fabrics (e.g. T-shirts, underwear), as they have a tendency to shrink.
  • Page 21 Programme chart Woollens handcare Max. load: 2 kg* Fabric type Woollen fabrics Notes – This programme only fluffs up woollen garments. They are not dried completely by this programme. – Remove garments as soon as the programme has finished and leave to finish drying at room temperature. Low temperature Low temperature cannot be deselected.
  • Page 22 Programme chart Cool air Max. load: 6 kg* Fabric type – Any item which only needs airing. Warm air Max. load: 6 kg* Fabric type – Multi-layered fabrics whose layers have different drying characteristics, e.g. jackets, pillows. – For drying individual items, e.g. bath towels, bathing costumes, tea-towels and small loads.

  • Page 23: Changing The Programme Sequence

    Changing the programme sequence Once a programme has started Altering Delay start ^ See "Delay start". - changing the programme You cannot change to another Adding or removing laundry programme once a programme has after a programme has started started (this prevents unintentional ^ Press the Door button.

  • Page 24: Electronic System Lock

    Electronic system lock Now slowly turn the programme The system lock prevents the dryer selector six positions stage by stage being used without your knowledge. in an anti-clockwise direction. Each of the six programme indicator It can be activated if wished. lights must come on one after the other.

  • Page 25: Cleaning And Care

    You could also use a cleaning brush which is available as an optional extra from your Miele dealer or the Miele Spare Parts Department, or use a vacuum cleaner. ^ Also clean the door seal (2) with a damp cloth.

  • Page 26: Cleaning The Grilles In The Door Opening

    Clean the grilles in the door opening the mains electricity supply. and also the area underneath them from time to time. Miele branded cleaning and conditioning products are available to order via the internet on www.miele-shop.com. ^ Clean the housing, control panel and door seal with a slightly damp cloth and a mild detergent or soapy water.

  • Page 27: Problem Solving Guide

    Cooling down or Finish may also If this problem happens again, flash in the display. there is a fault. Contact Miele. Bars are flashing at The programme has You can either unload the drum the end of the finished but the laundry...
  • Page 28 See above for possible – Try to resolve the The programme stops causes and their problem by following remedies. the instructions given the Clean out airways above. indicator light comes – If this problem happens again, The buzzer sounds. contact Miele.

  • Page 29: Other Problems

    Problem solving guide Other problems Problem Possible cause Remedy The drying Please check all the possible causes and switch the process goes on dryer off and then back on again. too long or even Ventilation to the dryer is Open a door or window while switches off.
  • Page 30 Problem solving guide Problem Possible cause Remedy Items made of synthetic Synthetic fibres tend to Static charge can be fibres are charged with attract static charge. reduced by adding a static electricity after fabric conditioner to the drying. final rinse in the washing programme or a fabric conditioner sheet to the load when drying.
  • Page 31 – Select one of the programme indicator programmes. light does not light up. – If it still will not start, there is a fault. Contact the Miele Service Department. The Start/Stop indicator The dryer is in Standby See "Programmable light is flashing slowly mode.

  • Page 32: Changing The Lamp

    ^ Apply a little pressure and whilst doing so turn your wrist in the direction of the arrow to open the cover. The cover will open downwards. The temperature resistant lamp should only be ordered from your Miele Dealer or the Miele Spare Parts Department.

  • Page 33: After Sales Service

    Optional accessories for this dryer are the data plate (visible when the door is available from your Miele Dealer, the opened). Miele Spare Parts Department or via the internet at www.miele-shop.com. Please note that telephone calls may be monitored and recorded for training purposes.

  • Page 34: Installation And Connection

    Installation and connection Front view Venting connection: rear, right or left (supplied with the rear socket open) Mains connection cable Control panel Door Four height adjustable screw feet...

  • Page 35: Rear View

    Venting connection at the rear hold it by the front feet. Washer-dryer stack The tumble dryer can also be combined with a Miele washing machine in a washer-dryer stack. The appropriate "WTV" stacking kit (available to order) to match your dryer is required.

  • Page 36: Levelling The Machine

    Installation and connection Levelling the machine The gap between the base of the dryer and the floor must not be blocked by deep pile carpets, plinths, etc as this would prevent a sufficient intake of air. Room ventilation The dryer operates by drawing in air from the room in which it is located.

  • Page 37: Electrical Connection

    Electrical connection Electrical connection U.K. Non-rewireable plugs BS 1363 All electrical work should be carried out The fuse cover must be refitted when by a suitably qualified and competent changing the fuse, and if the fuse cover person, in strict accordance with is lost, the plug must not be used until a current national and local safety suitable replacement is obtained.

  • Page 38: Installation - Venting

    – The ducting outlet (e.g. wall pipe) * Available as an optional accessory should be installed in such a way from your Miele dealer or the Miele that the moist expelled air . . . Spare Parts Department..cannot be drawn back into the room in which the dryer is installed;...

  • Page 39: Calculating The Total Duct Length

    Venting connection to the 1.0 m require straight ducting. Multiply this left/right amount by the corresponding *optional accessory from Miele additional duct length factor in Table I. ^ Establish the number of angles, Table II bends etc. necessary and add their...

  • Page 40: Installation To The Rear, Left Or Right Side Of The Appliance

    Installation - venting Installation to the rear, left or Calculation example right side of the appliance At the rear The dryer is delivered with this connection open. ^ Fit one of the venting systems described on the following pages. Left or right side of the appliance Wall pipe, with louvred vent = 1 x 3.8 m Additional duct = 3.8 m...

  • Page 41: Venting Systems

    ^ The following items are required: ..flexible ducting hose . . . a wall vent kit* or window vent kit*. * (Miele optional accessory). Insert adapter (1) into the vent opening on the dryer. Attach the hose (2).
  • Page 42 Installation - venting Installation examples Connection to an exhaust flue Window vent 1. Pipe with connection piece (= supplied with the Miele wall vent 1. Window vent kit (fitted in a kit) "plexiglass" pane) (separate fitting instructions are 2. Adapter for flexible hose supplied with the Miele window vent 3.

  • Page 43: Plastic Piping

    1. Wall vent kit available from your dealer or builders (Separate fitting instructions are merchants. Where the pipe diameter supplied with the Miele wall vent kit). is more than 100 mm, an adapter is 2. Adapter necessary (e.g. from C 100 to 125 3.

  • Page 44: Connect Directly To A Wall Vent

    (* Miele optional accessories). Before drilling into the wall, ..please read the installation instructions supplied with the Miele 1. Wall pipe wall vent kit. 2. Flexible foam gasket . . . and study the following diagrams.

  • Page 45: Washer-Dryer Stack

    Installation - venting Washer-dryer stack Stacking kit* without pull-out shelf: A = 94.2 cm B = 170 cm Stacking kit* with pull-out shelf: A = 96 cm B = 172 cm * Miele accessory available to order...

  • Page 46: Consumption Data

    Consumption data Programme Load Final spin speed Energy Duration in a domestic washing machine Minutes Cottons 1000 (60 % residual moisture)** 2.00 Normal 1000 (60 % residual moisture)** 3.58 1200 (53 % residual moisture) 3.20 1400 (50 % residual moisture) 3.05 1600 (48 % residual moisture) 2.70...

  • Page 47: Technical Data

    Technical data Height 850 mm Width 595 mm Depth 634 mm Depth with door open 1074 mm Suitable for pushing under a worktop Suitable for stacking Weight 46 kg Drum volume 111 litres Maximum capacity 6 kg dry weight Length of connection cable Voltage see data plate Connected load...

  • Page 48: Programmable Functions For Changing Default Settings

    Programmable functions for changing default settings The programmable functions are used to alter the tumble dryer´s electronics to suit changing requirements. Programmable functions can be altered at any time.

  • Page 49: Programmable Functions

    Programmable functions Altering the residual moisture A number to show which option is level in the Cottons selected will appear in the display programme alternating with the letter P. The tumble dryer is designed to dry 0 Increased residual moisture. effectively using as little energy as Laundry damper.

  • Page 50: Altering The Residual Moisture Level In The Minimum Iron Programme

    Programmable functions Altering the residual moisture A number to show which option is level in the Minimum iron selected will appear in the display programme alternating with the letter P. The tumble dryer is designed to dry 0 Increased residual moisture. effectively using as little energy as Laundry damper.

  • Page 51: Anti-Crease

    Programmable functions Anti-crease A number to show which option is Anti-crease helps prevent creasing, if selected will appear in the display alternating with the letter P. laundry is not normally removed immediately after the end of a 0 Anti-crease off programme.

  • Page 52: Altering The Volume Of The Buzzer

    Programmable functions Altering the volume of the A number to show which option is buzzer selected will appear in the display alternating with the letter P. The buzzer has two volumes. 0 Normal buzzer Follow the steps ( , , ...) to (factory default setting) programme and store in memory.

  • Page 53: Altering The Standard Drying Level In The Automatic Programme

    Programmable functions Altering the standard drying A number to show which option is level in the Automatic selected will appear in the display programme alternating with the letter P. The tumble dryer is designed to dry 0 Increased residual moisture. effectively using as little energy as Laundry damper.

  • Page 54: Extending The Cooling Down Time

    Programmable functions Extending the cooling down A number to show which option is time selected will appear in the display alternating with the letter P. The cooling down phase which takes place before the end of a programme 0 Cooling down time not extended can be extended by 5 or 10 minutes, (factory default setting) if required.

  • Page 55: Standby

    Programmable functions Standby Factory default. Not in current programme To save energy, the display and the As described under "On" above. programme sequence/check lights However, the display and programme go out after 10 minutes and the sequence/check lights will stay on after Start/Stop button starts flashing the programme has started and remain slowly.
  • Page 56 Programmable functions Before you begin, ensure that: A number to show which option is – The tumble dryer is switched off. selected will appear in the display alternating with the letter P. – The door is closed. Press the Start/Stop button and keep 0 On it pressed in whilst carrying out steps I Factory default setting.

  • Page 57: Memory Function

    Programmable functions Memory function A number to show which option is The electronics will memorise any selected will appear in the display alternating with the letter P. extra options selected for a programme. The duration selected 0 Memory deactivated for the Warm air or Cool air timed (factory default setting) drying programmes will also be stored in memory.

  • Page 58: Clean Out Airways Indicator

    Programmable functions Clean out airways indicator A number to show which option is Fluff should be removed after drying. selected will appear in the display alternating with the letter P. The Clean out airways indicator will remind you to clean the filters when a 0 Clean out airways indicator light is certain amount of fluff has collected deactivated...

  • Page 59: Keypad Tone

    Programmable functions Keypad tone A number to show which option is An audible tone sounds each time a selected will appear in the display alternating with the letter P. button is pressed. 0 Keypad tone deactivated Follow the steps ( , , ...) to programme and store in memory.

  • Page 60: Adjusting The Dryer's Electronics For Very Soft Water

    Programmable functions Adjusting the dryer's – The Low temperature indicator light will flash on and off slowly once and electronics for very soft water then on and off quickly twice. In some areas of the UK, water is A number to show which option is extremely soft which can affect the selected will appear in the display sensitivity of the control electronics.

  • Page 61: Extending The Range Of The Drying Levels

    Programmable functions Extending the range of the A number to show which option is drying levels selected will appear in the display alternating with the letter P. You can extend the range of the drying levels for many of the 0 Default setting programmes: 1 Drying level range extended...
  • Page 64 Alteration rights reserved/0113 M.-Nr. 07 856 790 / 04...

Table of Contents