Advertisement

Operating and installation instructions
Cooker hoods
DA 362, DA 362 EXT
DA 372, DA 372 EXT
GiW
To avoid the risk of accidents
or damage to the appliance it is
to read these instructions
before it is installed or used for the first time.
M.-Nr. 05 889 281

Advertisement

Table of Contents
loading

Summary of Contents for Miele DA 362

  • Page 1 Operating and installation instructions Cooker hoods DA 362, DA 362 EXT DA 372, DA 372 EXT To avoid the risk of accidents or damage to the appliance it is to read these instructions before it is installed or used for the first time.
  • Page 2: Table Of Contents

    ......... . 3 .
  • Page 3 Electrical and electronic appliances often contain materials which, if The transport and protective packing handled or disposed of incorrectly, has been selected from materials which could be potentially hazardous to are environmentally friendly for human health and to the environment. disposal, and can normally be They are, however, essential for the recycled.
  • Page 4 This appliance complies with all Before connecting the appliance to relevant local and national safety the mains supply, make sure that requirements. Inappropriate use the voltage and frequency details given can, however, lead to personal injury on the data plate correspond with the and damage to property.
  • Page 5 Never These models may only be combined leave an open grill unattended when with a Miele external motor. grilling. Overheated oil and fat can ignite and could set the cooker hood on fire.
  • Page 6 All ducting, pipework and fittings gases out through a chimney or must be of non-flammable material. extraction ducting. These can be obtained from the Miele When used in exraction mode and also Spare Parts department or from when an external motor is fitted, the builders' merchants.
  • Page 7 If adequate ventilation can only be Harmful gases such as carbon achieved through an open window, a monoxide could be drawn out of the window contact switch must be fitted. chimney or extraction ducting back This ensures that the hood can only be into the room with potentially fatal operated when the window is opened consequences.
  • Page 9 This is used to operate the fan settings and the lighting. The indicator lamp for the charcoal filter touch control lights up when the recirculation mode charcoal filters need to be replaced. The touch control is used: extra accessory available to order for –...
  • Page 10 The cooker hood works with (...EXT models only) The air is drawn in and cleaned by the The ...EXT models are designed to be grease filter and then directed outside. connected to an external motor located outside the room. If the on-site ventilation system does not have a , the The external motor is connected to the...
  • Page 11: Master Switch

    ^ Press the joystick once to the right. The fan will come on at power level "lI". Switch the master switch to the on position "–". The fan and the lighting can now be operated. The second fan setting indicator will If the appliance is not going to be used light up.
  • Page 12: Hob Lighting

    The hob lighting can be switched on It is advisable to run the fan for a few and off independently of the fan. minutes after cooking is finished to neutralise any lingering odours in the air, whether you are using air extraction or recirculation mode.
  • Page 13: Filter Operating Hours Counter

    After the new charcoal filters have been put in place, the filter operating hours The number of hours the appliance has counter must be re-set. been in operation is stored in memory. ^ Press the charcoal filter touch control for about 3 seconds. The indicator lamp for the touch control will go out.
  • Page 14 The power level touch control lamps show the time which has been set: 1st lamp from the left = 20 hours You can set the operating hours 2nd lamp from the left = 30 hours counter to suit the type of cooking you 3rd lamp from the left = 40 hours 4th lamp from the left = 50 hours –...
  • Page 15 (with recirculation mode) The charcoal filters must be fitted for the cooker hood to be used in recirculation mode. On delivery, the operating hours counter for the charcoal filters is set to For recirculation mode, the operating ^ Use the joystick to select the time hours counter needs to be set to the required.
  • Page 16 Remove any soiling straight away. applicable) ^ A microfibre "E-Cloth" is available The surfaces and controls are from the Miele UK Spare Parts susceptible to scratches and Department which is suitable for abrasions. Please observe the cleaning surfaces such as stainless following cleaning instructions.
  • Page 17: Housing

    Depending on the cleaning agent used, cleaning the grease filter in a dishwasher can cause permanent discolouration to the surface. However, this will not affect the functioning of the filter in any way. ^ After cleaning, leave the filter to dry for a while on an absorbent surface before putting it back in place.
  • Page 18 Always replace the filters immediately if Charcoal filters can be obtained from the lamp for the charcoal filter touch your dealer or the Miele Spare Parts control comes on, or if they are no Department. longer effective in absorbing kitchen See back cover for contact details, odours.
  • Page 19 Disconnect the cooker hood from the mains electricity supply. Ensure that: – it is switched off at the wall socket and the plug has been withdrawn – the fuse has been withdrawn from the fused spur connection unit, or ^ Turn the halogen lamp anti-clockwise –...
  • Page 20 *Cut-out dimensions A depth of at least 40 mm must be provided at the back of the building in niche.
  • Page 21 *Cut-out dimensions A depth of at least 40 mm must be provided at the back of the building in niche.
  • Page 22 Safety regulations prohibit the fitting (Air extraction mode only, of this cooker hood above a solid not for operation with an external motor) fuel stove. For safety reasons the between the top of the cooker/hob and the bottom of the cooker hood should be at least: –...
  • Page 23 Operation with an external motor (...EXT models) ^ If a C 150 mm exhaust ducting has to be used, adapt the stub by cutting it off at the join with a sharp knife (see illustration). The exhaust stub does not need to be adapted if C 125 mm ducting is being used.
  • Page 24 The following parts, available through When fitting the exhaust grille make your dealer or from the Miele Spare sure that the slats in the grille point Parts Department are required for towards the centre of the room and...
  • Page 25 The joystick can be extended if required. ^ Whilst counterholding the base of the joystick with an SW 9 spanner (do not turn), secure the joystick extension to ^ Fit the lower section of the joystick the stub using a spring washer in onto the stub and lightly secure in between them, as shown above.
  • Page 26 ^ Before using the appliance for the ^ If the cooker hood is to be connected first time, take the grease filter out and remove the protective foil from to an external motor (...EXT models): the filter frame. Then replace the Use the connection cable with 6 pole grease filter.
  • Page 27 – Where ducting is horizontal it must Danger of toxic fumes. be laid to slope away at at least 1 cm Please heed the "Warning and per metre. Safety instructions" to avoid the This is to ensure that condensate danger of toxic fumes. cannot drain back into the cooker The cooker hood should be installed hood.
  • Page 28: Exhaust Connection

    If the exhaust ducting is to run through rooms, ceiling space etc. where there may be great variations in temperature between the different areas, the problem of sweating or condensation will need to be addressed. The exhaust ducting will need to be suitably insulated.
  • Page 29 For extra safety it is advisable to install All electrical work should be a residual current device (RCD) with a undertaken by a suitably qualified trip current of 30 mA. and competent person in strict accordance with national and local safety regulations.
  • Page 30 In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – Your Miele Dealer – The Service Department (see back cover for address). When contacting your Dealer or the Service Department, please quote the model and serial number of your appliance.
  • Page 31 Connected load For ...EXT models the connected load DA 362, DA 372....320 W and extraction power will depend on Fan....2 x 110 W the type of motor fitted.
  • Page 32 Alteration rights reserved / 4804 M.-Nr. 05 889 281 / 04 en - GB...

This manual is also suitable for:

Da 362 extDa 372 ext

Table of Contents