Setting The Input Signal Format - Pioneer PDP-502MX Manual

Menu Mode

6) Setting the input signal format

INPUT 3 and 4 support RGB and two component video signal types. Thus, you must make the appropriate setting for
the particular component.
This setting needs to be made separately for INPUT 3 and 4, as described below.
(Examples) • To reproduce RGB signals
• To reproduce HDTV equipments = SIGNAL : COMPONENT 1
• To reproduce DVD players
Set-able condition
Factory preset
1 Select SETUP.
Screen 1
MAIN MENU
PICTURE
SCREEN
ALL RESET
POWER SAVE
3SET UP
MENU : MENU OFF
5∞ 3
: SELECT
102
: When reproducing video signals (other than
PC signals) via INPUT 3 or 4. (For PC signals,
input setting is RGB.)
: INPUT 3 : RGB
INPUT 4 : RGB
CONTRAST : 0
: 0
BRIGHT
: 0
COLOR
: 0
TINT
: 0
SHARP
RESET
SET : NEXT
= SIGNAL : RGB
= SIGNAL : COMPONENT 2
2 Move the cursor to SIGNAL and change the
setting using the SET button.
Pressing the SET button moves the settings
through the sequence RGB=COMPONENT
1=COMPONENT 2···.
Screen 2
SET UP
TERMINAL
SETTING
3SIGNAL
CLAMP
HIGH CONTRAST : OFF
EXIT
5∞ 3
: SELECT
: BNC
: VIDEO
: RGB
: MODE 1
SET : CHANGE