Shutting Down The Projector - Epson PowerLite 720c User Manual

note
When the projector has not
received any input signals for
30 minutes, it automatically
turns off the projector lamp
and enters "sleep mode." This
conserves electricity, cools the
projector, and extends the life
of the lamp. If you are done
using the projector, unplug
the power cord. If you want
to start projecting again, press
the button.
Power
caution
To avoid damaging the
projector or lamp, never
unplug the power cord
when the power light is
green or flashing orange.
Using the Projector
28

Shutting Down the Projector

When you've finished using the projector, follow the recommended
procedure to shut it down. This extends the life of the lamp and
protects the projector from possible overheating.
1. If you're using a computer, shut it down first.
2. To turn off the projector, press the
projector or remote control. You see a confirmation message. (If
you don't want to turn it off, press any other button.)
3. Press the button again. The power light flashes orange for
Power
about forty five seconds as the projector cools down. When the
projector has cooled, the orange light stays on and the exhaust fan
shuts off.
If you want to turn the projector on again, wait until the orange
light stops flashing. Then press the
4. Retract the front feet as shown.
button on the
Power
Power
Page down Page up
Computer S-Video/Video Color Mode
Menu A/V Mute Freeze
E-Zoom
button.
Power