Connecting and Configuring the
Projector
Before using the Easy Management software to manage your
projector(s), you have to connect each projector you want to monitor
to your network and configure it with an IP address.
1. Connect the projector to your network using a commercially
available 100BaseTX or 10BaseT network cable.
Connect the cable to the
2. Turn on the projector (see page 28).
3. Press the
button on the remote control, select
Menu
from the
Network
port on the projector as shown:
LAN
menu, then press
Enter
Managing the Projector from a Remote Computer
Wired LAN
.
75