SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON product. EPSON is not responsible for any use of this information as applied to other products.
Registration and Warranty ......5 Unpacking the Projector ......6 Additional Components .
Page 4
Adjusting the Image ....... 24 Controlling the Projector ......28 Shutting Down the Projector .
Page 5
Cleaning the Lens ....... . . 60 Cleaning the Projector Case ......60 Cleaning and Replacing the Air Filter .
Page 6
Connecting to Additional Equipment Installing the Projector ......82 Connecting to a PC Desktop Computer ....84 Connecting to a Desktop Macintosh .
Images are displayed at a resolution of 1024 × 768 pixels (PowerLite 800p and 810p) or 800 × 600 pixels (PowerLite 600p). The 0.9-inch LCD provides a high contrast ratio for incredibly vivid images and clear text. Improved color processing technology reduces “video noise”...
Getting the Most from Your Projector Your EPSON PowerLite projector is a highly versatile presentation note tool. You can connect it to one or two computer sources and up to You can connect a maximum three video sources and easily switch between them. You can also of four sources at the same include sound for up to three of the sources.
Audio Out Using Your Documentation To connect the projector to your laptop and get your presentation up and running fast, see the Quick Setup sheet in your Owner’s Kit. This book contains all the information you need to set up and use your projector.
See page 68 Help for details. support.epson.com Download FAQs and e-mail your questions to EPSON support. CD-ROM Your Owner’s Kit includes the PowerLite 600p/800p/810p CD-ROM, which lets you register electronically and includes an...
If you still need help after checking this User’s Guide and the sources listed above, you can use the EPSON PrivateLine Support service to get help fast. Call (800) 637-7661 and enter the PIN on the card in your Owner’s Kit. Or take advantage of EPSON’s automated support services 24 hours a day.
(or the equivalent) when you need to send the projector to another location. If you are moving the projector by hand, use a carrying case (such as the optional cases available from EPSON). See page 8 for more information about cases. Welcome...
Some older PowerBooks and Macintosh desktop models may need the Macintosh adapter set shown on page 89 (available from EPSON; see page 8). Older iMac systems may need a special adapter to provide a VGA output port; see your computer dealer.
Optional Accessories To enhance your use of the projector, EPSON provides the following optional accessories: Product Replacement lamp and air filter Customized carrying cases: Ceiling mount Kensington security lock Projection screens: Wireless microphone and two satellite speakers Auxiliary audio system...
Setting Up the Projector his chapter tells you how to set up the projector for a laptop computer or video presentation. If you need to set up the projector for a permanent installation or connect it to a desktop or workstation computer, see Appendix A.
Positioning the Projector Before connecting the projector, you need to decide where to place it. The location you choose depends on the size of the room and what you are projecting. note It’s easier to position the projector when the screen is Most presenters find it convenient to place the projector in front of directly in front of the room.
Page 17
If you place the projector below the level of the screen, you’ll have to tilt it up by extending the feet as shown. Tilting the projector upward causes the image to lose its square shape, but you can correct the...
Computer2/Component Video video-out or monitor port. If you’re using a PowerBook and you can’t connect the cable, you may need to use the Macintosh desktop adapter as shown on page 89 (available from EPSON; see page 8). port. Computer2/Component Video port...
The USB cable also provides audio support. If your presentation includes sound, you can play it through the projector’s speakers by connecting the USB cable. 1. Locate the cable you need, depending on whether your laptop has a round PS/2 mouse port or a flat USB mouse port.
2. Connect the other end of the audio cable to your laptop’s If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 20 for instructions. Setting Up the Projector projector.
For S-Video, use the S-Video cable supplied with your video device or obtain one from your electronics dealer. For component video, you’ll need a VGA-to-component video cable. You can purchase this from EPSON; see page 8. Component video connectors are usually colored green, blue, and red.
Connecting the RCA A/V Cable Before starting, make sure the projector and your DVD player or other video source are turned off. 1. Connect the yellow plug on one end of the A/V cable to the 2. Connect the other yellow plug to the video-out jack on your video 3.
Before starting, make sure the projector and your DVD player or other video source are turned off. 1. Insert one end of an S-Video cable into the projector’s connector.
VGA-to-component video cable, which is available from EPSON; see page 8. Before starting, make sure the projector and your DVD player or other video device are turned off. 1. Connect the VGA end of the cable to the projector’s 2.
(as described in Chapter 1 or Appendix A), you’re ready to turn on the projector, adjust the image, and give your presentation. Although you can operate the projector without it, the remote control lets you use additional features.
Turning On Your Equipment Make sure your projector and other equipment are set up and connected correctly, as described in Chapter 1 or Appendix A. Then turn on your projector, as described below, followed by any equipment you’ve connected to it. You can turn on your computer...
Page 27
Power The power light flashes green as the projector warms up, and the projection lamp comes on in about 30 seconds. The power light stays green, and you may see a blue screen with the message displayed.
No Signal If you’re using a PowerBook: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select 2.
Page 29
On most systems, the screen and the projector, or display on both at the same time. Allow a few seconds for the projector to sync up after pressing it. Depending on your computer’s video card, you might need to use the Display utility in the Control Panel to make sure that both the LCD screen and external monitor port are enabled.
Rotate the focus ring to sharpen the image. Rotate the zoom ring to reduce or enlarge the image. Using the Projector To focus or zoom your image, see below. If the image is too high or too low, you can reposition it. See page 25.
See page 35 for instructions. Adjusting the Height of Your Image If the image is too low, you can raise it by extending the projector’s foot. 1. Stand behind the projector. Press the foot release button and lift the front of the projector.
Using the Projector If your image looks like projector off to one side of the screen, at an angle. Move it directly in front of the center of the screen, facing the screen squarely. If you still can’t get a square image, press the left or right button on the projector’s control panel:...
Resizing the Image Some computer images need to be resized to display in the projector’s native resolution. If only part of your computer image is displayed, you can correct it with the Resize Press the button on the projector’s control panel (or on Resize the remote control).
After you select a source, the screen goes dark for a moment before the image appears. Adjusting the Volume If your presentation includes sound, you can adjust the volume from the projector’s control panel. Press the left or right side of the button. A/V Mute button...
When the projector has cooled, the orange light stays on and the exhaust fan shuts off. If you want to turn the projector on again, wait until the orange light stops flashing. Then press the 4.
Turn off the remote control before transporting it or storing it in a projector case. This prevents the batteries from discharging if something presses against one of the buttons. Using the Remote Control battery compartment cover.
Using the Remote Control When using the remote control, stand within 30 feet of the projector. Point the remote control either at the front or back of the projector or at the screen (the projector’s front sensor can detect signals bounced off the screen).
Adjusting the Volume If you’ve connected an audio source to the projector, you can adjust the sound that’s output through the projector’s speakers. Turning Off the Picture and Sound You can use the the image and sound and darken your screen. This is useful if you Power want to temporarily re-direct your audience’s attention without the...
Resize Resizing the Image Some computer images need to be resized to display in the projector’s native format—1024 × 768 pixels. If only part of your computer image is displayed, you can correct it with the Press the...
Displaying Picture-in-Picture Video You can open a small video window on your computer image, and view a video at the same time as your computer presentation. If you’re using component video, you can display a second video (from a composite or S-video source) in the window. First make sure you have connected your VCR or other video sources as described in Chapter 1.
4. To erase the pointer(s) pasted on the screen and cancel the effect, press on the remote control. a third time to see a different Power A/V Mute Freeze E-Zoom spot- light pointer note You can use the projector’s Effect menu to select different pointers. See page 50. Using the Remote Control...
Spotlighting Your Image With the Spotlight tool, you can highlight part of the screen. 1. To activate the spotlight tool, press button 2. Use the 3. To remove the spotlight, press You can change the default size of the spotlight using the Effect menu; see page 50.
To control your computer with the remote, make sure you have connected the mouse cable between the projector and your computer as described on page 13 (for laptops) or in Appendix A (for other systems).
Page 46
Power A/V Mute Freeze You can use the up and down arrow buttons on the remote control to Previous E-Zoom move the cursor or move through a PowerPoint presentation. Next Using the Remote Control To double-click, press down twice on the left mouse button. To click and drag, press down on the left mouse button and then tilt the button in the direction you want to drag.
Fine-tuning the Projector ou can use the projector’s on-screen menus to adjust the image, sound, and other features. You can also create your own startup screen, customize the highlighting tools, and find out how long your lamp has been in use. This chapter covers the following information:...
Using the Projector’s Menu System The eight projector menus let you adjust and customize the projector features from either the control panel or remote control: Fine-tuning the Projector The Video menu controls the look and quality of the projected image. It lets you adjust the image position and fine-tune settings such as Brightness, Sharpness, and Contrast.
Menu Menu Help Comp1 Comp2/YCbCr Source Video S-Video remote control menu options button on the control panel, Sync– button on the remote control, to Fine-tuning the Projector...
Page 50
, select Reset , and then press 6. Press the 7. Press Fine-tuning the Projector the control panel or the remote control to select it. The highlight moves to the first option for that menu. Sync+ Sync– button (remote control) to scroll through the list of options. (If a computer or video source isn’t connected, certain options may...
The Video menu lets you make adjustments to the projected image. The options available in the menu depend on which source is connected to the projector: standard computer video (analog RGB), DVI computer video (digital RGB), composite or S-Video, component video, or RGB video (standard TV).
(remote control) to set the following options: Tracking (analog computer images only) Removes unwanted vertical lines from a computer image by matching the projector’s internal clock to the computer display signal. Sync (analog computer images only) Corrects fuzziness by synchronizing the projector with the tracking signal sent from the computer.
Page 53
(the default for video or S-video display) For optimizing games Amusement: Resolution (analog computer images only) Leave this setting at Auto video signal automatically. If the projector is unable to sync up with the computer, select settings. Video Signal (video only) Leave this setting at Auto...
(resolution, tracking, sync signal, and position) in up to five different combinations. This is useful if you use more than one computer with the projector; you can save the settings for each one and recall them when necessary. Follow these steps to save the projector’s current settings:...
(remote control) to set the following options: Audio Input is automatically selected for computer sound, and Audio 1 for video. Select Audio2 through a USB cable connected to the projector. Volume Treble Bass 5. When you’re finished adjusting the sound, press button .
The tools to their default settings. 1. Press the 2. Use the 3. Press 4. Use the Fine-tuning the Projector option lets you return all the highlighting Reset button. You see the main menu. Menu button (control panel) or the Sync–...
You can transfer any image from your computer or video source to the projector, and then use it as your startup screen. You can also use it as the screen displayed when the projector is not receiving a signal or when you press the button.
(remote control) to select a zoom rate (display size), and then press and press Saving the logo may take a few moments. Do not use your projector or video source (computer, DVD player, etc.) while the logo is being saved. press to return to the menu screen.
Customizing Projector Features You can use the Setting menu to disable the projector’s sleep mode, adjust the image shape, and customize several other features. 1. Press the button. Menu 2. Use the button (control panel) or the Sync– (remote control) to highlight their settings on the right side: 3.
Page 60
Sleep mode When sleep mode is on, the projector turns off the lamp if it has not received any input signals for 30 minutes. Turn sleep mode off if you want the lamp to remain on all the time.
Setting Advanced Features You can use the Advanced menu to configure the projector for rear projection or ceiling mounting, and adjust several other features. 1. Press the button. Menu 2. Use the button (control panel) or the Sync– (remote control) to highlight their settings on the right side: 3.
The lamp usage timer doesn’t register until you’ve used the lamp for at least 10 hours. Fine-tuning the Projector Ceiling Turn on when the projector is mounted upside-down from the ceiling. COM Port Switches between serial ( RS-232C for programming/projector control.
Timer. Press to confirm the reset. 4. When you’re finished, press Restoring the Default Settings The Reset All option lets you return all the projector settings to their default values. Select and press the Reset All remote control to display the confirmation screen. Select all the default settings or to cancel.
You also need to periodically clean the air filter on top of the Before you clean any part of projector. A clogged air filter can block ventilation needed to cool the the projector, turn it off and projector and keep it from overheating.
Cleaning the Lens Clean the lenses whenever you notice dirt or dust on the surface. Cleaning the Projector Case Before you clean the case, first turn off the projector and unplug the power cord. Maintaining and Transporting the Projector Use a canister of compressed air to remove dust.
2. Stand the projector on end with the handle on top to keep dust and dirt from falling inside. 3. To clean the filter, EPSON recommends using a small vacuum cleaner designed for computers and other office equipment. If you don’t have one, gently clean the filter using a very soft brush (such...
This Contact your dealer or call EPSON at (800) 873-7766 in the United will make it easier for you to States and Canada for a replacement lamp. Request part number...
Page 69
1. Turn off the projector, wait for it to cool down (when the light stops flashing), then unplug the power cord. 2. Allow the projector to cool for at least half an hour (if it has been on). 3. Use a screwdriver to slide the latch and pop open the lamp cover.
Page 70
7. Once the lamp is fully inserted, tighten its screws. 8. To replace the lamp cover, insert the tabs and then snap the cover Maintaining and Transporting the Projector into place. (The projector won’t come on if the lamp cover is loose.)
You see the lamp usage hours and other settings. 3. Press to select Reset Lamp Timer. prompt: 4. Select , then press 5. When you’re finished, press button (remote Press again. You see this Menu Maintaining and Transporting the Projector...
When transporting the projector a long distance, first put it in a carrying case (such as an optional EPSON case), then pack it in a firm box, using cushioning around the case. If you want to store the remote control inside the projector’s carrying case, be sure to turn it off using the switch on its side.
Solving Problems his chapter helps you solve problems with your projector, and tells you how to contact technical support for problems you can’t solve yourself. This chapter explains the following: Using the projector’s on-screen help system What to do when the projector’s status lights flash...
1. Press the blue 2. Press the 3. Press the Solving Problems ? Help Help for the image Help for the sound Language selection (Language) button on the projector or the remote ? Help control. Power Help Computer/YCbCr Video Menu...
If the projector is not working correctly, first turn it off, let it cool, and unplug it. Then plug the power cord back in and turn on the projector. If this does not solve the problem, check the status lights on top of the projector and try the solutions recommended on the following pages.
Page 76
Make sure the power cord is connected securely both at the power outlet and the projector. If you have just replaced the lamp, make sure the cover is securely fastened. Replace the lamp as described on page 62.
Page 77
See page 61 for instructions. There is a problem with the cooling fan or temperature sensor. Turn off the projector and unplug it. Contact EPSON for help. ° C) and there is plenty of space...
Solving Problems Check that the P power light is green, not flashing, and the lens cap is off. The projector may be in sleep mode. If the P power light is orange, press the button to turn the projector on.
Page 79
On most systems, the screen and the projector, or display on both at the same time. Depending on your computer’s video card, you might need to use the Display utility in the Control Panel to make sure that both the LCD screen and external monitor port are enabled.
Page 80
See your software documentation for specific information. If the projector isn’t directly in front of the screen, facing the screen squarely, the image will be broader at the left or right side. Hold down the button on top of the projector until the image is square.
Page 81
60. Adjust the focus using the focus ring. Make sure the lens is not fogged by condensation. You may need to wait before using the projector after moving it from a cold environment to a warm environment. Adjust the setting on the Video menu (see page 46).
Page 82
Press the button on the projector or the on the remote control. This resets the projector’s tracking and sync settings. If further adjustment is needed, you can fine-tune the settings manually using the buttons on the projector’s...
Page 83
The colors of the image are not right. If you’re displaying a computer image, use the option in the projector’s Video menu to adjust the color. If you’re displaying video, adjust the settings on the Video menu. Try changing the Color Adjustment menu.
Solving Problems Make sure the remote control is turned on. Make sure you are within 30 feet (9 meters) of the projector, and within range of the projector’s front or back sensor (approximately 30° to left or right and 15° above or below).
Telephone Support Services To use the EPSON PrivateLine Support service, call (800) 637-7661 and enter the PIN on the EPSON PrivateLine Support card included in your Owner’s Kit. This is the fastest way of speaking to a live representative, and it’s free. This service is available 6 Pacific Time, Monday through Friday, for the duration of your warranty period.
Page 86
Before you call, please have the following information ready: You can purchase screens, carrying cases, or other accessories from EPSON at (800) 873-7766 or by visiting the EPSON Store at www.epsonstore.com (U.S. sales only). In Canada, please call (800) 873-7766 for dealer referral...
Appendix A: Connecting to Additional Equipment his appendix explains how to connect the projector to a desktop PC or Macintosh, high-end workstation, more than one computer, or a DVI video source. It also provides guidance on setting up the projector in a permanent installation.
See “Positioning the Projector” on page 10 for If you place the projector’s lens so it’s level with the top of the screen, more information. the image will be square and you won’t have to adjust it. If you place the lens lower than the top of the screen, you’ll have to tilt the...
The projector’s internal speakers are loud enough for most rooms. However, if your installation requires maximum volume and sound quality, you can connect the projector to external speakers or a public address (PA) system. This disables the projector’s internal speakers.
Follow the steps in each section for the cables you need to connect. Before beginning, make sure the projector and computer are turned off. If you need help with positioning the projector, see page 10. Connecting the Computer Cable 1. Disconnect the monitor cable from the video port on the back of 2.
Page 91
3. Connect one end of the computer cable to the projector’s port, as shown. Computer2/Component Video Computer2/Component Video Port 4. Connect the other end of the cable to the computer’s video port. 5. Tighten the screws on the connectors. Appendix A: Connecting to Additional Equipment...
USB cable. 1. Connect the square end of the USB cable to the projector’s USB 2. Disconnect your mouse from the port on the back of your Appendix A: Connecting to Additional Equipment port as shown.
Connecting the Audio Cable If your presentation includes sound and you want to use the projector’s built-in speakers, you’ll need to connect a stereo, mini-jack audio cable (not included). If you connected the USB cable, you may not need a separate audio cable.
Follow the steps in each section for the cables you need to connect. Before beginning, make sure the projector and computer are turned off. If you need help with positioning the projector, see page 10. Connecting the Computer Cable 1. Disconnect the monitor cable from the video port on the back of 2.
Page 95
4. Connect the other end of the computer cable to the video port on the Macintosh. If it doesn’t fit, you may have to use a Macintosh desktop adapter, which you can buy from EPSON (see page 8). To use the adapter, remove its cover as...
To use the remote control as a mouse follow the steps below. If the Macintosh has a USB port, you can use the USB mouse cable included with the projector. If it has a round mouse port, you’ll need a Macintosh mouse cable; see your projector dealer for help in obtaining the correct cable.
Connecting the Audio Cable If your presentation includes sound and you want to use the projector’s built-in speakers, you’ll need to connect a stereo, mini-jack audio cable (not included). If you connected the USB cable, you may not need a separate audio cable.
Connecting to a Second Computer To connect a second computer to the projector, you need to use the projector’s cable, unless the computer supports DVI (Digital Visual Interface) video. 1. Connect one end of the cable to the computer’s video port.
1. Connect the computer’s DVI cable to the projector’s port. 2. To display images properly, make sure the in the projector’s Setting menu is set correctly. See page 54 for instructions. If you want to connect audio for this computer, use the projector’s port;...
Page 100
Appendix A: Connecting to Additional Equipment...
Do not place the projector on an unstable cart, stand, or table. Do not use the projector near water or sources of heat. Use the type of power source indicated on the projector. If you are not sure of the power available, consult your dealer or power company.
Page 102
If liquid has been spilled into the projector, or if it has been exposed to rain or water. If it does not operate normally when you follow the operating instructions, or if it exhibits a distinct change in performance, indicating a need for service.
Remote Control Information You can operate the projector by remote control via a line-of-sight infrared (IR) receiver at the front and rear of the projector. The projector may not respond to remote control commands under the following conditions: There is an object between the remote control IR emitter and the IR receiver on the projector.
Trade Name: Type of Product: Multimedia Projector Model: Appendix B: Notices EPSON AMERICA, INC. 3840 Kilroy Airport Way MS: 6-43 Long Beach, CA 90806-2469 (562) 290-5254 EPSON...
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
When warranty service involves the exchange of the product or of a part, the item replaced becomes EPSON property. The exchanged product or part may be new or previously repaired to the EPSON standard of quality. Exchange or replacement products or parts assume the remaining warranty period of the product covered by this limited warranty.
Page 107
To locate the Authorized EPSON Servicer nearest you, call the EPSON Connection at (800) 637-7661 + PIN or (562) 276-4394 in the U.S. and (905) 709-3839 in Canada or write to: Epson America, Inc., P.O. Box 93012, Long Beach, CA 90809-3012. Appendix B: Notices...
Projection Lamp Type Power consumption Lamp life Part number Remote Control Range Batteries Mouse Compatibility Supports PS/2 and USB Dimensions Height Width Depth Weight Electrical Rated frequency Power supply Power consumption Appendix C: Technical Specifications UHE (Ultra High Efficiency) 200 W About 1500 hours ELPLP15 32.8 feet (10 meters)
Environmental Temperature Operating: 41 to 95 °F (5 to 35 °C) Storage: 14 to 140 °F (-10 to 60 °C) Humidity Operating: 20 to 80% RH, non-condensing Storage: 10 to 90% RH, non-condensing Safety United States FCC Part 15J Class B UL1950 Rev.
To project images output from a computer, the computer’s video card must be set at a refresh rate (vertical frequency) that’s compatible with the projector; see the following table for compatible formats. As noted below, some images are automatically resized to display in one of the projector’s “native”...
Page 113
M-PAL N-PAL PAL60 SECAM The image is resized so that it displays using one of the projector’s native formats. (PowerLite 600p only.) The image is resized so that it displays using one of the projector’s native formats. Not supported on the PowerLite 600p Resolution ×...
Computer Video Port Pin Assignments 15-pin micro-D-style connector. Here are its pin assignments: Pin no. Appendix C: Technical Specifications Computer2/Component Video Computer port Red video Green video Blue video Red GND Green GND Blue GND Reserved Synchronous GND Horizontal sync / composite sync Vertical sync port is a female video RGB,...
Capturing image, 51 to 52 Carrying case, 8, 66 Ceiling mount, 8, 82 Cleaning air filter, 61 to 62 lens, 60 projector case, 60 Color problems, 77 settings, 46 to 47, 55 Color Mode setting, 47 Comp1 button, 33, 54, 77...
Page 116
Index iBook, connecting to, 12 iMac, connecting to, 7 Image adjusting, 24 to 27, 45 to 47 capturing and saving in projector, 51 to 52 correcting shape, 26, 53, 74 focusing, 24 height, adjusting, 25 positioning, 25, 46 problems with, troubleshooting, 72 to 77...
Page 117
Video, 42, 45 to 47 Mouse buttons, 39 to 40 New Hardware Wizard, 21 No-Signal Msg setting, 54 Options for projector, 8 P in P (picture in picture) button, 36 Picture source, selecting, 28, 33 Picture, see Image Picture-in-picture video source, selecting, 53...
Page 118
67 to 77 remote control problems, 78 Turning off picture (using A/V Mute), 28, 34 Turning off projector, 29 Turning on projector, 20 to 23 Unpacking projector, 6 to 7 Up arrow button, remote control, 40 audio, 21 cable, 6 to 7, 13, 86, 90 User’s Logo menu, 42, 51 to 52...
Page 119
Volume adjusting, 28, 34, 49 button, 28, 34 setting, 49 Warning lights, 69 to 72 Warranty, 5, 100 to 101 Workstations, connecting projector to, 93 Zoom ratio, 103 Zooming image, 24 to 25, 35 Index...