Printing Trim Lines - Epson 10600 Printer Manual

2-26 | Using Paper and Other Media
Note
Print quality may be
affected near the cut
edges if you change the
top and bottom margins
to 3 mm.

Printing Trim Lines

If you're printing on roll paper, you can have the printer print trim lines on
the right edge of your images or pages (if you're using Auto Cut) or on the
right and bottom edge (if you're not using Auto Cut). Follow these steps:
1. Press the
SelecType
2. Press the button repeatedly until you see
Item
the default setting.
3. Press the or button.
+ –
4. Press the button to save your new setting.
Enter
5. Press the or
Pause
If you're using the EPSON printer driver, you can also specify trim lines
through your print options. See page 3-3 (Macintosh) or page 4-6
(Windows) for more information.
Controlling Roll Paper Margins
The default margins for roll paper are 0.12 inches or 3 mm (left and right)
and 0.59 inches or 15 mm (top and bottom). You can use the Printer
Settings menu on the control panel to set all margins to 3 mm or 15 mm.
1. Press the
SelecType
the display.
2. Press the button repeatedly until
Item
appears on the display. This is the default setting.
Press the button once to set all margins to 3 mm.
• +
ROLL MARG=3MM
Press the button again to set all margins to 15 mm.
• +
ROLL MARG=15MM
You can use the
+
3. When you select the setting you want, press the
Then press the
Pause
2-26
button. You see the
PAPER LINE=ON
button to exit the Printer Setting menu.
SelecType
button.
PRINTER SETTING MENU
ROLL MARG=T/B15MM
appears on the display.
appears on the display.
or button to cycle through all three settings.
–
or button to exit the menu.
SelecType
PRINTER SETTING MENU
PAGE LINE=OFF
appears on the display.
appears on
button to save it.
Enter
.
. This is