XG Series User's Guide
5.15.8.2 watchdog service
Function
Available Model
Syntax
Options
Use Mode
Explanation
Explanation
Default
5.15.8.3 consoleinfo
Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Sets watchdog reset.
XG0224 / XG0448 / XG2600
watchdog service <mode>
<mode>
• on
Initiates watchdog reset function.
• off
Suspends watchdog reset function.
Configuration mode (admin class)
Initiates or suspends watchdog reset function.
If <mode> is set to on, if the device hangs it will reset within 16 to 48 seconds and restart.
If <mode> is set to off, it will not reset even if it hangs.
This setting will be reflected after saving the configuration and resetting or reconnecting
the power of the device.
If unset, the watchdog reset function will be initiated.
watchdog service on
Set the serial console connection service.
XG0224 / XG0448 / XG2600
consoleinfo autologout <time>
<time>
• Forced logout time
Specify a time period (from 0 to 86400 seconds (one day)) for the user to be forcibly
logged out if no commands have been executed while logging in on the serial console.
The unit shall be d (day), h (hour), m (minute), or s (second).
Specifying 0 seconds will not perform forced logout.
Configuration mode (admin class)
Set to log out forcibly if no command was executed within the time specified in <time>
while login via serial console.
It is assumed that forced logout is not set.
consoleinfo autologout 0s
301
Chapter 5 Command Reference
Device Information Settings