Configuration Commands - Fujitsu PRIMERGY BX600 User Interface Description

System Log Management Commands
Syntax
Show logging hosts
Default Setting
None
Command Mode
Privileged Exec
Display Message
Index (used for deleting)
IP Address IP Address of the configured server.
Severity The minimum severity to log to the specified address.
Port Server Port Number.This is the port on the local host from which syslog messages are
sent.
Status The state of logging to configured syslog hosts. If the status is disable, no logging
occurs.
7.6.4

Configuration Commands

7.6.4.1 logging buffered
This command enables logging to in-memory log where up to 128 logs are kept.
Syntax
logging buffered
no logging buffered
no - This command disables logging to in-memory log.
Default Setting
None
Command Mode
Privileged Exec
210
Command Reference
Intelligent Blade Panel Module