To Replace A Light Bulb; Cleaning - Bosch 5000 Series Use And Care Manual

Hide thumbs Also See for 5000 Series:
Table of Contents

Advertisement

Table 7: Oven Surface Cleaning
Surface
Racks
pow(Oven)
mode,
rack
Fiberglass Knit
(Gasket)
Gmass
(Window, Display')
Painted
paper (Exterior)
Porcelain
(Interior)
Stainless Steel
(Exterior)
Ptastic
(Knobs, Controls)
Cleaning
Methods
Cleaning
Method
Oven Surfaces
Wash with hot sudsy water. Rinse thoroughly
and dry, or gently rub with cleansing
der or soap filled pads as directed. If racks are cleaned in the oven during the selfodean
they will lose their shiny finish and may not glide smoothly. If this happens, wipe the
edges with a small amount of vegetable oil, then wipe off excess.
DO NOT HAND CLEAN GASKET.
Wash with soap and water or glass cleaner. Use Fantastik® or Formula 409 (R) t o remove
grease spatters and stubborn stains.
Clean with hot sudsy water or apply Fantastik (R) o r Formula 409 (_ to a clean sponge or
towel and wipe clean. Avoid using powdered cleansers, steel wool pads and oven clean
ers,
Immediately
wipe up acid spills like fruit juice, milk and tomatoes with a dry towel. Do
not use a moistened sponge/towel on hot porcelain. When cool, clean with hot sudsy
water or apply Bon-Ami _>or Soft Scrub® to a damp sponge. Rinse and dry- For stubborn
stains, gently use soap filled pads. It is normal for porcelain to craze (fine lines) with age
due to exposure from heat and food soil.
Always wipe or rub with grain. Clean with a soapy sponge then rinse and dry, or wipe
with Fantastik® or Formula 409 _) sprayed onto a paper towel. Protect and polish with
Stainless Steel Magic® and a soft cloth. Remove water spots with a cloth dampened with
white vinegar. Use Bar Keeper's Friend® to remove heat discoloration.
When cool, clean with soapy water, rinse and dry.
Replacing
the Oven Light
Each oven is equipped with two halogen lights located in the back wall of the oven.
The lights are switched on when the door is opened or when the oven is in a cooking cycle.
The oven lights do not operate during self-dean.
Each light assembly consists of a removable lens, a light bulb and a light socket housing that is fixed in place
(see Figure 17, next page).
To replace
a light
bulb (seefigure :[7,next page):
:[.
Read WARNING on this page.
2.
Turn off power at the main power supply (fuse or
breaker box).
3.
Unscrew lens and remove.
4.
Pull straight out on light bulb to remove from
socket.
5.
Replace the bulb with a new one. Avoid pressing
the bulb with fingers; Oils from hands can damage
the bulb when it becomes hot
6.
The bulb is halogen :[2V - 20W.
7.
Screw the lens back on.
8.
Replace the fan cover (if applicable).
9.
Turn power back on at the main power supply
(fuse or breaker box).
WARNING
Hake sure the oven and lights are cool and
power to the oven has been turned off before
repladng the light bulb(s). Failure to do so
could result in electrical shock or burns.
The lenses must be in place when using the
oven.
The lenses serve to protect the light bulb from
breaking.
The lenses are made of glass. Handle carefully
to avoid breaking. Broken glass could cause an
injury.
English _ :[5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents