Epson Disc Producer PP-100 User Manual page 70

Stacker 4
Stacker 2
Note:
❏ Be sure to let CDs and DVDs dry completely before using them or touching the printed surface.
Allow Epson specified discs to dry for at least 1 hour and other types of discs for at least 24
hours.
❏ If the print position is misaligned, adjust it using the printer driver. For details, refer to the printer
driver Help.
❏ If the ink smears, adjust the color saturation. For details, refer to the printer driver Help.
❏ When publishing discs using Batch Mode, the number of discs output to stacker 3 is not always
the same as the number of discs loaded into stacker 2. Also, the number of discs does not
always become 50. The same applies to the number of discs output to stacker 2. For Batch
Mode, the output stacker switches to stacker 2 when the ejected discs accumulated in stacker
3 reach the height limit. As a result, the number of discs output to the stacker depends on the
thickness of the discs used.
Standard Mode
External Output Mode
Stacker 3
Up to about 5 discs
Stacker 4
Publishing Discs
70