Page 1
Projector CP-X705W/CP-X615W User's Manual (detailed) – Operating Guide Thank you for purchasing this projector. WARNING WARNING CAUTION NOTE Trademark acknowledgment...
Page 2
Read this Safety Guide first. Projector User's Manual - Safety Guide Thank you for purchasing this projector. WARNING • Before using, read these user's manuals of this projector to ensure correct usage through understanding. After reading, store them in a safe place for future reference.
Safety Precautions WARNING Never use the projector if a problem should occur. Abnormal operations such as smoke, strange odor, no image, no sound, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. can cause a fire or electrical shock. In such case, immediately turn off the power switch and then disconnect the power plug from the power outlet.
Page 4
Safety Precautions (continued) WARNING Be cautious of High temperatures of the projector. High temperatures are generated when the lamp is lit. It could result in fire or burn. Use special caution in households where children are present. Do not touch about the lens, air fans and ventilation openings during use or immediately after use, to prevent a burn.
Page 5
Safety Precautions (continued) WARNING Be careful in handling the light source lamp. The projector uses a high-pressure mercury glass lamp made of glass. The lamp can break with a loud bang, or burn out. When the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector’s vent holes.
Page 6
Safety Precautions (continued) CAUTION Be careful in moving the projector. Neglect could result in an injury or damage. • Do not move the projector during use. Before moving, disconnect the power cord and all external connections, and close the slide lens door or attach the lens cap.
Page 7
Safety Precautions (continued) CAUTION Remove the power cord for complete separation. • For safety purposes, disconnect the power cord if the projector is not to be used for prolonged periods of time. Disconnect the • Before cleaning, turn off and unplug the projector. Neglect could result in plug from the fire or electrical shock.
Page 8
Safety Precautions (continued) NOTE About consumables. Lamp, LCD panels, polarizors and other optical components, and air filter and cooling fans have a different lifetime in each. These parts may need to be replaced after a long usage time. • This product isn’t designed for continuous use of long time. In the case of continuous use for 6 hours or more, or use for 6 hours or more every day (even if it isn’t continuous), or repetitious use, the lifetime may be shortened, and these parts may need to be replaced even if one year has not passed since the beginning of using.
Page 9
Lamp WARNING HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
Regulatory Notices FCC Statement Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 14
Part names Control panel Rear panel (14) (13) (17) (6) (18) (20) (9) (19) RGB1 HDMI VIDEO AUDIO IN 1 RGB2 AUDIO IN 2 AUDIO OUT REMOTE CONTROL AUDO IN 3 AUDIO IN 4 CONTROL AC IN (10) (11) (15) (16) (12) (21) (5) (4) CAUTION...
Part names Remote control LASER INDICATOR STANDBY/ON VIDEO (17) BLANK LASER (26) (11) (27) (21) ASPECT (22) (23) ENTER PUSH (28) (29) PAGE UP PAGE DOWN (20) (24) MENU RESET (25) (10) POSITION AUTO (12) (18) MAGNIFY MY BUTTON VOLUME (14) MUTE (15)
Setting up Connecting your devices AUDIO OUT RGB OUT AUDIO OUT RGB OUT RS-232C HDMI USB-A RGB1 HDMI VIDEO AUDIO IN 1 RGB2 AUDIO IN 2 AUDIO OUT REMOTE CONTROL AUDO IN 3 AUDIO IN 4 CONTROL AUDIO IN VIDEO OUT AUDO IN OUT S-VIDEO OUT AUDO IN OUT...
Page 20
Setting up Connecting your devices (continued) NOTE About Plug-and-Play capability NOTE for HDMI...
Page 21
Setting up Connecting power supply WARNING...
Remote control Laser pointer WARNING CAUTION Putting batteries (HITACHI MAXELL, Part No.LR6 or R6P) WARNING...
Page 23
Remote control About the remote control signal The front and top sensors: The back sensor: 30º 30º NOTE 30º 30º 20º 20º Changing the frequency of remote control signal...
Remote control Using as a wired remote control NOTE Using as a simple PC mouse & keyboard (1) Mouse left button (2) Mouse right button LASER INDICATOR STANDBY/ON VIDEO BLANK LASER (3) Lever switch BLANK LASER ASPECT ASPECT ENTER PUSH PAGE UP PAGE DOWN ENTER...
Operating Adjusting the volume ENTER PUSH PAGE UP PAGE DOWN MENU RESET POSITION AUTO MAGNIFY MY BUTTON VOLUME MUTE Temporarily muting the sound POSITION AUTO MAGNIFY MY BUTTON VOLUME MUTE FREEZE KEYSTONE SEARCH Selecting an input signal LASER INDICATOR STANDBY/ON VIDEO...
Page 27
Operating Selecting an input signal (continued) LASER INDICATOR STANDBY/ON VIDEO MAGNIFY MY BUTTON VOLUME Searching an input signal MUTE FREEZE KEYSTONE SEARCH Selecting an aspect ratio For an RGB signal For an HDMI signal ASPECT For a video signal, s-video signal or component video signal For no signal...
Operating Adjusting the zoom and focus Adjusting the lens shift 1/10 NOTE 1/10 Using the automatic adjustment feature ENTER PAGE UP PAGE DOWN MENU RESET For an RGB signal POSITION AUTO MAGNIFY MY BUTTON VOLUME For a video signal and s-video signal For a component video signal...
Operating Adjusting the position PUSH ENTER PAGE UP PAGE DOWN MENU RESET POSITION AUTO MAGNIFY MY BUTTON VOLUME Correcting the keystone distortions MAGNIFY MY BUTTON VOLUME MUTE FREEZE KEYSTONE SEARCH...
Operating Using the magnify feature MENU RESET POSITION AUTO MAGNIFY MY BUTTON VOLUME MUTE NOTE Freezing the screen MAGNIFY MY BUTTON VOLUME MUTE FREEZE KEYSTONE SEARCH...
EASY MENU EASY MENU (continued) Item Description BRIGHTNESS CONTRAST COLOR TINT SHARPNESS WHISPER MIRROR RESET FILTER TIME LANGUAGE Go to Advanced Menu...
IMAGE Menu Item Description For an RGB signal For an HDMI signal ASPECT For a Video signal, S-video signal or Component video signal For no signal OVER SCAN • V POSITION above) H POSITION above)
Page 39
IMAGE Menu IMAGE Menu (continued) Item Description H PHASE H SIZE For an RGB signal For a video signal and s-video signal AUTO ADJUST EXECUTE For a component video signal...
INPUT Menu Item Description PROGRESSIVE VIDEO NR 3D-YCS COLOR SPACE...
Page 41
INPUT Menu INPUT Menu (continued) Item Description AUDIO IN 1 VIDEO COMPONENT AUDIO IN 2 S-VIDEO AUDIO IN 3 AUDIO IN 4 SCART OUT VIDEO FORMAT HDMI...
Page 42
INPUT Menu INPUT Menu (continued) Item Description FRAME LOCK RGB IN...
Page 43
INPUT Menu INPUT Menu (continued) Item Description RESOLUTION...
OPTION Menu Item Description AUTO SEARCH AUTO KEYSTONE AUTO ON...
Page 52
OPTION Menu OPTION Menu (continued) Item Description AUTO OFF LAMP TIME 60, 61) FILTER TIME 62, 63)
Page 53
OPTION Menu OPTION Menu (continued) Item Description MY BUTTON SERVICE FAN SPEED...
Page 54
OPTION Menu OPTION Menu (continued) Item Description AUTO ADJUST GHOST FILTER MESSAGE SERVICE • LENS TYPE...
Page 55
OPTION Menu OPTION Menu (continued) Item Description KEY LOCK REMOTE RECEIV. REMOTE FREQ. SERVICE (continued) INFORMATION FACTORY RESET...
Page 56
OPTION Menu OPTION Menu (continued) Item Description 1. Using Security Features 1.1 Inputting the PASSWORD 2600 SECURITY 1.2 Changing the PASSWORD...
Page 57
OPTION Menu OPTION Menu (continued) Item Description 1.3 If you have forgotten your PASSWORD 2. Using the MyScreen PASSWORD Function SECURITY PASSWORD 2.1 Turning on the MyScreen (continued) Function 2.2 Setting the PASSWORD...
Page 58
OPTION Menu OPTION Menu (continued) Item Description 2.3 Turning the PASSWORD off SECURITY (continued) 2.4 If you have forgotten your PASSWORD 3. Using the PIN LOCK Function 3.1 Registering the PIN Code...
Page 59
OPTION Menu OPTION Menu (continued) Item Description SECURITY (continued) 3.2 Turning Off the PIN LOCK Function 3.3 If you have forgotten your PIN Code...
Page 60
OPTION Menu OPTION Menu (continued) Item Description 4. Using the Transition Detector Function Transition Detector 4.1 Turning On the Function SECURITY (continued) 4.2 Setting the Transition Detector PASSWORD...
Page 61
OPTION Menu OPTION Menu (continued) Item Description 4.3 Setting the Transition Detector off 4.4 If you have forgotten your PASSWORD 5. Using the MY TEXT PASSWORD function 5.1 Writing the MY TEXT SECURITY (continued)
Page 62
OPTION Menu OPTION Menu (continued) Item Description 5.2 Displaying the MY TEXT 5.3 Turning on the MY TEXT PASSWORD SECURITY (continued)
Page 63
OPTION Menu OPTION Menu (continued) Item Description SECURITY (continued)
Page 64
NETWORK Menu ENTER NOTE Network Settings of the User’s Manual - Network Guide) Date/Time Settings of the User’s Manual - Network Guide) Item Description ENTER SETUP DHCP (Dynamic Host Protocol)
NETWORK Menu NETWORK Menu (continued) Item Description ADDRESS SUBNET MASK DEFAULT GATEWAY SETUP SERVER TIME DIFFERENCE DATE TIME Date/Time Settings of the User’s Manual - Network Guide)
Page 66
NETWORK Menu NETWORK Menu (continued) Item Description ENTER INPUT RESET ENTER INPUT PROJECTOR NAME ENTER INPUT ENTER INPUT ENTER INPUT...
Page 67
NETWORK Menu NETWORK Menu (continued) Item Description e-SHOT (Still Image Transfer) Display of the User’ s Manual - Network Guide) ENTER To switch the image displayed e-SHOT To return to the menu RESET ENTER INPUT...
Page 68
NETWORK Menu NETWORK Menu (continued) Item Description INFORMATION SERVICE...
Troubleshooting Related messages Message Description There is no input signal. The horizontal or vertical frequency of the input signal The internal temperature is rising. 25, 63)
Page 76
Troubleshooting Regarding the indicator lamps POWER LAMP TEMP Description indicator indicator indicator The projector is in a standby state. Orange Blinking The projector is warming up. Green The projector is in an on state. Green Blinking The projector is cooling down. Orange The projector is cooling down.
Page 77
Troubleshooting Regarding the indicator lamps (continued) POWER LAMP TEMP Description indicator indicator indicator The cooling fan is not operating. Blinking Blinking There is a possibility that the interior portion has become heated. Blinking Green blinking in There is a possibility that the interior portion has become overcooled.
Troubleshooting Phenomena that may be easy to be mistaken for machine defects WARNING Reference Phenomenon Cases not involving a machine defect page The electrical power cord is not plugged in. The power switch is not set to the on position. The main power source has been interrupted during operation such as by a power outage (blackout), etc.
Page 79
Troubleshooting Phenomena that may be easily mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The signal cables are not correctly connected. The MUTE function is working. The AUDIO setting is not correct. The audio on your HDMI equipment is not set to Linear PCM. The audio on the HDMI input is muted.
Page 80
Troubleshooting Phenomena that may be easily mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The FREEZE function is working. Color settings are not correctly adjusted. COLOR SPACE setting is not suitable. The brightness and/or contrast are adjusted to an The WHISPER function is working.
Page 83
Projector CP-X705W/CP-X615W User's Manual (detailed) Network Guide Thank you for purchasing this projector. This projector has the network function that brings you the following main features. Web control e-SHOT (Still Image Transfer) Display WARNING NOTE • The information in this manual is subject to change without notice. •...
Page 84
Content About this manual................1 Content ..................2 1. Main functions ................3 ........... 3 ............3 2. Equipment connection and network setting......4 ..............4 ............. 5 2.2.1 Equipments connection ................. 5 ..................5 ................. 8 .................. 9 3. Management with Web browser software ......10 ....
Page 92
3. Management with Web browser software browser software. E-mail Alerts Projector Management using SNMP e-SHOT (Still Image Transfer) Display...
Page 93
3. Management with Web browser software browser NOTE...
Page 94
3. Management with Web browser software Item Description Administrator User Network Information Network Settings settings. Port Settings communication port settings. Mail Settings Alert Settings warning alerts. Schedule Settings settings. Date/Time Settings time settings. Security Settings Projector Control Projector Status projector status. Network Restart connection.
Page 95
3. Management with Web browser software 3.1.1 Logon Example 192.168.1.10 “http://192.168.1.10/” [Logon]. Item Password <blank> <blank>...
Page 96
3. Management with Web browser software 3.1.2 Network Information Item Description Projector Name Displays the projector name settings. DHCP IP Address Subnet Mask Displays the subnet mask. Default Gateway MAC Address Firmware Date Firmware Version...
Page 97
3. Management with Web browser software 3.1.3 Network Settings Item Description DHCP ON DHCP OFF IP Address Subnet Mask Default Gateway Projector Name sysLocation (SNMP) sysContact (SNMP) DNS Server Address [Apply]...
Page 98
3. Management with Web browser software NOTE restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.
Page 99
3. Management with Web browser software 3.1.4 Port Settings Item Description Network Control Port1 (Port:23) Port open [Enable] [Enable] Authentication this port. Network Control Port2 (Port:9715) Port open [Enable] [Enable] Authentication this port. Image Transfer Port (Port:9716) Port open [Enable] [Enable] Authentication for this port.
Page 100
3. Management with Web browser software 3.1.5 Mail Settings Item Description [Enable] Send mail SMTP Server IP Address Network Settings to 255 characters. Sender E-mail address alphanumeric characters. can also specify [TO] or [CC] Recipient E-mail address characters. [Apply] NOTE [Send Test Mail] [Send Test...
Page 101
3. Management with Web browser software 3.1.6 Alert Settings Alert Item Description Cover Error Fan Error The cooling fan is not operating. Lamp Error There is a possibility that the interior portion has become Temp Error Air Flow Error The internal temperature is rising. Lamp Time Error There is a possibility that the interior portion has become Cold Error...
Page 102
3. Management with Web browser software Setting Item Description Alarm Time SNMP Trap [Enable] [Enable] Send Mail Cold Start Authentication Failure The length of the subject line can be up to 255 alphanumeric Mail Subject characters. Cold Start Authentication Failure Mail Text characters.
Page 104
3. Management with Web browser software Item Daily & Weekly Description Schedule [Enable] Schedule List Item [Enable] Schedule Date (Month/Day) Schedule List [Apply] [Add] items. Item Description Time Command [Parameter] Power Input Source Display Image [Register] [Delete] [Reset] NOTE...
Page 105
3. Management with Web browser software 3.1.8 Date/Time Settings Item Description Current Date year/month/day format. Current Time hour:minute:second format. [ON] Daylight Savings Time the following items. Start Month Week hour Time minute Month Week hour Time minute...
Page 106
3. Management with Web browser software Item Description Time difference manager. [ON] SNTP SNTP Server IP Network Address Settings to 255 characters. Cycle hours:minutes [Apply] NOTE restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.
Page 107
3. Management with Web browser software 3.1.9 Security Settings Item Description Administrator authority Administrator ID characters. Administrator Password characters. Re-enter Administrator Password User authority User ID characters. User Password characters. Re-enter User Password...
Page 108
3. Management with Web browser software Item Description Network Control control. Authentication Password Re-enter Authentication Password SNMP Community name be up to 64 alphanumeric characters. [Apply NOTE restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.
Page 109
3. Management with Web browser software 3.1.10 Projector Control The items shown in the table below can be NOTE [Refresh] button. Item Description Main Power Turns the power on/off. Input Source Picture Mode Blank On/Off Mute Freeze Magnify Picture Brightness Contrast Gamma Color Temp...
Page 110
3. Management with Web browser software Item Description Image Aspect Over Scan V Position H Position H Phase H Size Auto Adjust Execute Input Progressive Video NR 3D-YCS Color Space Component C-Video Format S-Video Format HDMI Frame Lock-RGB1 Frame Lock-RGB2 Frame Lock-HDMI RGB in-1 RGB in-2...
Page 111
3. Management with Web browser software Item Description Audio Volume Treble Bass SRS WOW Speaker Audio-RGB1 Audio-RGB2 Audio-HDMI Audio-Video Audio-S-Video Audio-Component HDMI-Audio Screen Language Menu Position V Menu Position H Blank Startup MyScreen Lock Message Turns the message function on/off. Option Auto Search Turns the automatic signal search function on/off.
Page 112
3. Management with Web browser software 3.1.11 Projector Status Item Description Error Status Displays the current error status Lamp Time Displays the usage time for the current lamp. Filter Time Power Status Displays the current power status. Input Status Displays the current input signal source. Blank On/Off Mute Freeze...
Page 113
3. Management with Web browser software 3.1.12 Network Restart Item Description Restart NOTE [Restart] button to log on again. 3.1.13 Logoff When [Logoff]...
Page 114
3. Management with Web browser software 3.2 E-mail Alerts NOTE power. Mail Settings ( through a web browser. “http://192.168.1.10/” [Logon]. [Port Settings] on the main menu. [Enable] [Apply] NOTE SMTP Port [Network Restart] items. [Mail Settings] the item 3.1.5 Mail Settings [Apply] NOTE...
Page 115
3. Management with Web browser software 3.2 E-mail Alerts (continued) [Alert Settings] for further information. [Apply] Time <Failure/Warning time>...
3. Management with Web browser software 3.3 Projector Management using SNMP to use this function. NOTE SNMP Settings ( “http://192.168.1.10/” [Logon]. [Port Settings] on the main menu. [Enable] SNMP Port NOTE SNMP Port [Network Restart] following items. [Security Settings] on the main menu. [SNMP] NOTE Community Name has been...
Page 117
3. Management with Web browser software NOTE...
Page 119
3. Management with Web browser software Date/Time Settings ( “http://192.168.1.10/” [Logon]. [Date/Time Settings] [Apply] NOTE Daylight Savings Time or SNTP following the instructions on replacing the battery.
Page 120
3. Management with Web browser software 3.5 e-SHOT (Still Image Transfer) Display NOTE browser. Refer to...
Page 121
3. Management with Web browser software Example: If the IP address of the projector is set to 192.168.1.10: "http://192.168.1.10/" click [Logon]. [Port Settings] on the main menu. [Enable] Image Transfer Port (Port: 9716) [Enable] [Authentication] setting when [Apply] [Security Settings] on the main menu. [Network Control] [Apply] NOTE...
Page 122
3. Management with Web browser software Communication Port NOTE Command Control Settings ( “http://192.168.1.10/” [Logon]. [Port Settings] on the main menu. [Enable] Network Control Port1 (Port: 23) to [Enable] [Authentication] setting when [Enable] Network Control Port2 (Port: 9715) to [Enable] [Authentication] setting when [Apply]...
Page 123
3. Management with Web browser software [Security Settings] on the main menu. [Network Control] [Apply] NOTE Network Control Port1 (Port: 23), Network Control Port2 (Port: 9715) Image Transfer Port (Port: 9716). the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.
Page 124
3. Management with Web browser software Command Format Reply Error code Send Data format Connection Header Data length RS-232C command Check sum 13 bytes 1 byte 1 byte...
Page 125
3. Management with Web browser software Reply Data format Connection Reply 1 byte Connection Reply 1 byte <Error reply> Connection Reply Error code 2 bytes 1 byte <Data reply> Connection Reply Data 2 bytes 1 byte <Projector busy reply> Connection Reply Status code 2 bytes...
Page 126
3. Management with Web browser software Authentication NOTE...
Page 127
Projector CP-X705W/CP-X615W User's Manual – Operating Guide Technical Example of computer signal Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480 37.9 72.8...
Page 128
Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Back porch (b)
Page 129
Connection to the ports Connection to the ports RGB1 HDMI VIDEO AUDIO IN 1 RGB2 AUDIO IN 2 AUDIO OUT REMOTE CONTROL AUDO IN 3 AUDIO IN 4 CONTROL RGB 1, RGB OUT D-sub 15pin mini shrink jack • Video signal: RGB separate, Analog, 0.7Vp-p, •...
Connection to the ports (continued) RGB1 HDMI VIDEO AUDIO IN 1 RGB2 AUDIO IN 2 AUDIO OUT REMOTE CONTROL AUDO IN 3 AUDIO IN 4 CONTROL COMPONENT VIDEO RCA jack x3 • System: 525i(480i), 525p(480p), 625i(576i), 750p(720p), 1125i(1080i) Port Signal Component video C Component video C S-VIDEO...
Connection to the ports (continued) RGB1 HDMI VIDEO AUDIO IN 1 RGB2 AUDIO IN 2 AUDIO OUT REMOTE CONTROL AUDO IN 3 AUDIO IN 4 CONTROL AUDIO IN 1, AUDIO IN 2 Ø3.5 stereo mini jack AUDIO IN 3 L, AUDIO IN 4 RCA jack x2 AUDIO OUT Ø3.5 stereo mini jack...
Page 132
Connection to the ports (continued) RGB1 HDMI VIDEO AUDIO IN 1 RGB2 AUDIO IN 2 AUDIO OUT REMOTE CONTROL AUDO IN 3 AUDIO IN 4 CONTROL USB B type jack Signal 1 +5V 2 - Data 3 + Data 4 Ground RJ-45 jack Signal Signal...
RS-232C Communication RS-232C Communication CONTROL port RS-232C cable (Cross) RS-232C port of the projector of the computer - (1) (1) CD RD (2) (2) RD TD (3) (3) TD - (4) (4) DTR GND (5) (5) GND - (6) (6) DSR RTS (7) (7) RTS CTS (8)
Page 134
RS-232C Communication (continued) Requesting projector status (Get command) (1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes)+ ‘00H’ +‘00H’) from the computer to the projector. (2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer. Changing the projector settings (Set command) (1) Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) + setting code (2 bytes)) from the computer to the projector.
Page 135
Command Control via the Network Command Control via the Network Communication Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Command Control Settings Port Settings Click the [Enable] check box to open [Network Port open Control Port1 (Port: 23)] to use TCP #23.
Page 136
Command Control via the Network (continued) Command Format [TCP #23] 1. Protocol Consist of header (7 bytes) + command data (6 bytes) 2. Header BE + EF + 03 + 06 + 00 + CRC_low + CRC_high 3. Command data Command data chart byte_0 byte_1...
Command Control via the Network (continued) Decreasing the projector setting value (Decrement command) (1) The PC sends the following decrement code to the projector. Header + Command data (‘05H’ + ‘00H’ + type (2 bytes) + ‘00H’ + ‘00H’) (2) The projector decreases the setting value on the above setting code. (3) The projector returns the response code ‘06H’...
Page 138
Command Control via the Network (continued) 7. Reply Data The connection ID (the data is same as the connection ID data on the sending data format) is attached to the Network control commands reply data. ACK reply: ‘06H’ + ‘xxH’ NAK reply: ‘15H’...
Page 139
RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code Power TURN OFF BE EF 06 00 2A D3 01 00 00 60 00 00 TURN ON BE EF 06 00 BA D2 01 00 00 60 01 00...
Page 140
RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code GAMMA #1 DEFAULT BE EF 06 00 07 E9 01 00 A1 30 20 00 #1 CUSTOM BE EF 06 00 07 FD 01 00 A1 30 10 00...
Page 141
RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code COLOR TEMP HIGH BE EF 06 00 0B F5 01 00 B0 30 03 00 BE EF 06 00 9B F4 01 00 B0 30 02 00 BE EF...
Page 142
RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code MY MEMORY Load BE EF 06 00 0E D7 01 00 14 20 00 00 BE EF 06 00 9E D6 01 00 14 20 01 00 BE EF...
RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code COLOR SPACE AUTO BE EF 06 00 0E 72 01 00 04 22 00 00 BE EF 06 00 9E 73 01 00 04 22 01 00 SMPTE240...
RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code FRAME LOCK TURN OFF BE EF 06 00 3B 2C 01 00 50 30 00 00 RGB1 TURN ON BE EF 06 00 AB C3 01 00 50 30...
Page 145
RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code VOLUME- BE EF 06 00 01 CC 02 00 65 20 00 00 COMPONENT Increment BE EF 06 00 67 CC 04 00 65 20 00 00 Decrement...
Page 146
RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code SRS WOW – RGB1 TURN OFF BE EF 06 00 FE FF 01 00 90 20 00 00 BE EF 06 00 9E FE 01 00 90 20 02 00...
Page 147
RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code AUDIO - RGB1 TURN OFF BE EF 06 00 FE DD 01 00 30 20 00 00 Audio1 BE EF 06 00 6E DC 01 00 30 20 01 00...
Page 148
RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code REMOTE RECEIV. BE EF 06 00 FF 32 01 00 00 26 00 00 FRONT BE EF 06 00 6F 33 01 00 00 26 01 00 BE EF...
Page 149
RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code BLANK My Screen BE EF 06 00 FB CA 01 00 00 30 20 00 ORIGINAL BE EF 06 00 FB E2 01 00 00 30 40 00 BLUE...
Page 150
RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code MY BUTTON-1 RGB1 BE EF 06 00 3A 33 01 00 00 36 00 00 RGB2 BE EF 06 00 FA 31 01 00 00 36 04 00 HDMI...
Page 151
RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code MAGNIFY BE EF 06 00 7C D2 02 00 07 30 00 00 Increment BE EF 06 00 1A D2 04 00 07 30 00 00 Decrement BE EF...
Page 152
Hitachi, Ltd. Consumer Business Group Shin-Otemachi Bldg 5f, 2-1, Otemachi 2-Chome, Chiyoda-Ku, Tokyo 100-0004 Japan HITACHI EUROPE LTD. HITACHI EUROPE S.A. Consumer Affairs Department 364, Kifissias Ave. & 1, Delfon Str. PO Box 3007 152 33 Chalandri Maidenhead Athens Berkshire SL6 8ZE...