Switching to the VTR setting screen
Switch to the VTR setting screen in VTR mode to perform the following operations.
● To adjust sound quality (EQ, POS etc.)
● To switch screen modes (wide mode)
Touch
SET
.
BACK
● Touch
Turning off the VTR mode
Press
.
● Press
again to resume playback.
VOL
● Press
played before the power was turned off.
●After switching to the VTR operation screen, touch switches will be displayed for
about 6 seconds. Pressing
●The VTR operation screen can be displayed by touching the screen, even when
the VTR is playing.
●It is possible that the image may not be displayed correctly depending on the
connected devices.
to return to the VTR operation screen.
VTR1
and then touch
AUDIO
to resume playback of the video that was being
will display them again.
127