ESN security operating procedure
[OPEN] button
[CD
] button
How to operate the ESN (Key CD) security
How to program the Key CD
● If a CD has already been inserted, a [SEC] message appears,
● If a security is activated, programming the Key CD is not
Check that the unit is in standby.
Press and hold the [FUNC] button, then button [6],
and hold both for more than one second.
A [SEC] message appears, in two seconds it will change to
[DISC].
and then the front panel opens and the CD is ejected.
available.
Press the [OPEN] or [CD
The front panel opens; The CD8445 is now ready for your Key
CD in the CD slot.
Insert the CD into the slot.
A [SEC] message appears, then the Key CD is ejected.
Press the [OPEN] or [CD
The front panel closes.
[FUNC] button
Button [6]
] button.
] button.
26