Basic operation
Basic operation
[PWR] button
This section covers basic operating procedures. For additional
details, please refer to the sections on specific functions.
Turning the power on and off
Turning the power on and off.
When the power is turned on, the state used when the power was
turned off such as CD and tuner playing is restored.
When the vehicle has no ACC position on the ignition switch, care is
needed when turning off the deck. Follow Step 2 or Step 3 when
turning off the power.
1
When power is OFF, press the [PWR] button.
When the unit is in ACC OFF mode, press the [PWR] button
once and it will change to Standby mode. When you press the
[PWR] button again, the power will come on.
When power is ON, press the [PWR] button for less than
2
two seconds.
The unit will change to Standby mode.
When power is ON, press the [PWR] button for more
3
than two seconds.
The unit will change to ACC OFF mode.
If a car is not equipped with an ACC position (for example, a
European car), keep the [PWR] button depressed for more than
ATTENTION
two seconds.
20