Removing P2 Cards
1
Press the STOP button.
If the access lamp of the P2 card to be
removed is blinking in orange, you can press
the STOP button to stop recording or
playback and to abort ongoing operations
such as clip copying and deleting or just wait
for the operation to finish.
◆ NOTE:
• In the USB Device mode, confirm that the
access lamp is off.
Access Lamp
2
Raise the EJECT button.
1
3
Press the EJECT button to eject the P2
card.
Preventing Accidental Deletion
Set the write-protection switch to PROTECT to
prevent accidental deletion of data recorded on a
P2 card.
Write-protection
switch
Basic Operation: About P2 Cards
31