Hot Water Temperature Adjustment By Remote Control; Program" Button On The Remote Control - Bosch Remote Control User Manual

temperature indication is shown on
the remote control LCD.
B Switch ON/OFF switch to "OFF"
position (0) and then back on (I).
B Press buttons
to reach requested temperature.
New remote control is programmed.
4.4 Hot water temperature
adjustment by remote
control
B Press the buttons
the remote control (Fig. 8, pos. 2)
until the required
appears on the remote control
display (Fig. 8, pos. 1).
B When the required temperature is
displayed, turn on the hot water tap.
B The required temperature will flash
on the remote control display.
B The flashing will stop when the
required temperature is reached
(tolerance from selected set point +/
-5°F (+/- 2°C).
Fig. 8 Temperature adjustment
6 720 606 990
or in order
or on
temperature
Using the remote control
4.5 "Program" button on the
remote control
Memorizing
temperature
control "Program" button
B Press the buttons
the remote control (Fig. 9, pos. 2), )
until the
appears on the remote control
display (Fig. 9, pos. 1).
B You will now be able to memorize
this temperature by pressing the
"Program" button on the remote
control (Fig. 9, pos. 3) for 3
seconds.
Note: Previously saved
i
temperature may show
on the display when first
pushing the program
button. Once "PR"
shows on the display,
the desired setting will
be saved.
the
with the remote
or
required temperature
water
on
9