Pulse To Tone Conversion - Panasonic KXTA308 - ANALOG PBX Installation Manual

P
P
ulse to Tone Conversion
Description
Conditions
Programming References
Feature Reference
Operation Reference
— User Manual
3-102 Features
This feature allows the extension user to change from pulse dialing
to tone (DTMF) dialing so that the user can access special services,
such as computer telephone services or Voice Mail, which require
tones.
• This feature only works for outside (CO) lines which have set the Pulse
Dialing mode or Call Blocking mode.
• The user can select the dial mode for each outside (CO) line using the
Dial Type Selection feature.
• Changing from tone to pulse is not possible.
Section 4, System Programming
[119] Redialing After Pulse to Tone Conversion
[401] Dial Mode
Section 3, Features
Dial Type Selection
Telephone Features

Pulse to Tone Conversion

3 Features