CAUTION
Please beware of the following precautions before installing the VCS.
•
Avoid positioning the product in any place where the unit may come into contact with moisture, dust, or soot.
•
Avoid placing in direct sunlight or near heating appliances.
•
Keep the product away from electric sparks or magnetic substances.
•
Avoid temperature extremes (recommended operating temperature is between 0°C - 40°C).
•
Do not place any conductive material through the ventilation grills.
•
Keep the system turned off before installation.
•
Ensure enough space is left for cable connections.
•
Place the system on a solid surface with sufficient air ventilation. Avoid any surface that vibrates.
•
Placing the system near electronic devices such as a radio may cause the product to breakdown.
•
Do not disassemble the product without seeking assistance from LG Electronics.
•
Do not place any heavy object on the system.
•
Prevent any substances from being inserted into the system.
-
This may cause system breakdown.
•
Install the system in a place with sufficient air ventilation.
-
Keep at least 15cm distance between the back of the system and the wall.
•
Do not install the system in a place with high magnetic, electric wave, or wireless devices such as a radio.
-
Do not install the system in a place with magnetic objects, electric frequencies, or vibration.
•
Do not place any heavy object on the system.
-
This may cause system breakdown.
•
Install the system on a stable, level surface.
-
The system may not operate properly.
•
Install the system in a place with appropriate moisture and temperature levels.
-
Avoid installing the system in a place with high (over 40°C) or low (under 0°C) temperature.
•
The system can be damaged from a strong impact or vibration. Avoid throwing objects within the vicinity of the system.
•
Avoid direct sunlight or any heating appliances.
-
Recommended operating temperature is over 0°C (32°F).
•
Ventilate the air inside the system operation room, and tighten the system cover firmly.
-
System breakdown may be caused by an inappropriate environment. It is recommended to use AVR (Automatic Voltage Regulator)
for a stable power supply. It is recommended to coil the core-ferrite around the connector of the system to avoid electromagnetic
interference.
•
The outlet must be placed on the ground.
•
If there is strange sound or smell, unplug the power cable immediately and contact the service center.
-
This may cause fire or electric shock.
•
In order to maintain stable system performance, have your system checked regularly by the service center.
-
LG Electronics is not held responsible for system breakdown caused by user mishandling.
-
There is a risk of explosion if a battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
•
Do not overturn the product during use.
Safety Information
5
1