Error Displays - Panasonic AG-HMC80PJ Operating Instructions Manual

Screen displays (continued)

Error displays

The following messages are displayed when
an error has occurred in the camera or the SD
Memory Card. If the problem is not solved by
switching the power off and back on again,
either change the card in accordance with the
instructions displayed, or consult the place of
purchase.
■
C
CHECK CARD
SYSTEM ERROR
TURN POWER OFF
Displayed when a card-related error has
occurred in the system. Switch the power off and
back on again.
For details on how to resolve the problem, see
the CHECK CARD warning display.
■
E
ERROR OCCURRED.
RECORDING IS STOPPED.
Displayed when an error has occurred during
recording. Start the recording again. If the
message appears again, please consult the
place of purchase.
• Please switch the power off if the message
continues to appear.
• Please try inserting a different card if the
message appears again after restarting
recording.
■
P
POWER TURNED OFF DUE TO FAN
STOPPING.
Displayed when an error has occurred with the
fan. The power then turns off.
Wait a few minutes, and then try turning the
power on again.
98
■
S
SYSTEM ERROR
TURN POWER OFF
Displayed when an error has occurred in the
system. Switch the power off and back on again.
• If this error is displayed when accessing the
SD Memory Card, such as when deleting a
clip, the SD Memory Card may be damaged.
Please replace it with a new SD Memory
Card.
• If this error is displayed when repairing the
SD Memory Card, please use the AVCCAM
Restorer content repair software (Page 30).