Wireless Xdp Parallel Mode - Panasonic KX-TDE100 Operating Manual

Pure ip-pbx
Hide thumbs Also See for KX-TDE100:
Table of Contents

Advertisement

Whisper OHCA is only available with certain digital proprietary telephones and IP proprietary
telephones. In addition, both you and the other party must use supported telephones.
Whisper OHCA is not available for outside calls; only call waiting tone can be set (refer
to "1.3.13 Call Waiting Tone").
A PDN extension can only receive OHCA or Whisper OHCA from the corresponding SDN
extension. When a call is made from another extension, a PDN extension will receive a call
waiting tone. (® 1.3.49 PDN (Primary Directory Number)/SDN (Secondary Directory Number)
Extension)
For information about answering a waiting call, refer to "1.3.12 CALL WAITING FEATURES".

1.3.78 Wireless XDP Parallel Mode

Your PS can be used in parallel with a PT or SLT.
When in this mode, incoming calls to a wired telephone also ring the paired PS.
To set
PS
PS
Press TALK.
To cancel
PS
PS
Press TALK.
Some wired telephones are prohibited from using this feature.
If you go off-hook while your paralleled telephone is in use, the call will switch over to you.
Document Version 2008-10
4
8
1
Enter
48.
Enter 1.
4
8
0
Enter 0.
Enter
48.
1.3.78 Wireless XDP Parallel Mode
extension no.
C.Tone
Enter extension number
of the paired telephone.
C.Tone
Press CANCEL.
Press CANCEL.
Operating Manual
145

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tde200Kx-tde600Tde600Tde200

Table of Contents