Download Print this page

HP ProLiant DL288 Installation Instructions

Hp sata dvd rw optical drive installation instructions for hp proliant servers
Hide thumbs Also See for ProLiant DL288:

Advertisement

Quick Links

HP SATA DVD RW Optical Drive

Installation Instructions

for HP ProLiant servers
© Copyright 2007, 2011 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
Microsoft and Windows are U.S. registered trademarks of Microsoft
Corporation. Bluetooth is a trademark owned by its proprietor and used by
Hewlett-Packard Company under license.
Part Number: 453282-003
June 2011
Edition: 3
*453282-003*
453282-003
Overview
This document provides installation and software support information
for the HP SATA DVD RW optical drive. The SATA DVD RW drive
enables you to provide a read and write solution to CD and DVD
media for HP ProLiant servers.
The primary purpose of the SATA DVD RW drive is data storage.
For more information about this product, see the HP website
(http://www.hp.com).

Installing the drive

CAUTION: To prevent damage to electrical components,
properly ground the server before beginning any
installation procedure. Improper grounding can cause
electrostatic discharge.
For more information on installing the drive in a specific server, see the
documentation provided with the server.
To install the component:
1.
Power down the server as indicated in the server-specific user
documentation.
2.
Disconnect the power cord from the power supply to remove
power from the server and all peripheral devices.
3.
Remove components that prevent access to the removable-media
drive bays.
4.
Install the drive.
5.
If needed, secure with the appropriate fasteners.
6.
Install all components removed from the server.
7.
Connect the power cord to the server, and then connect it to a
properly grounded electrical outlet.
8.
Power up the server.

Advertisement

loading

Summary of Contents for HP ProLiant DL288

  • Page 1: Installation Instructions

    Remove components that prevent access to the removable-media drive bays. Install the drive. © Copyright 2007, 2011 Hewlett-Packard Development Company, L.P. If needed, secure with the appropriate fasteners. The information contained herein is subject to change without notice. The only Install all components removed from the server.
  • Page 2: European Union Regulatory Notice

    Please refer to the regulatory label provided on the product. product does not emit hazardous laser radiation. The point of contact for regulatory matters is Hewlett-Packard GmbH, Each laser product complies with 21 CFR 1040.10 and 1040.11 Dept./MS: HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, except for deviations pursuant to Laser Notice No.

This manual is also suitable for:

Proliant ml310eProliant dl280