Configure The Settings Relating To The Camera Operations [Cam. Function] - Panasonic WV-SC384 Operating Instructions Manual

*1 It is necessary to designate the unicast port number
when "Unicast port (MANUAL)" is selected for
"Transmission type".
*2 It is necessary to designate the multicast IP address
when "Multicast" is selected for "Transmission
type".
Configure the settings relating to the camera operations
[Cam. Function]
Click the [Cam. Function] tab on the "Image/Audio" page. (☞ Pages 26 and 27: How to display/operate the setup
menu)
Configure the settings relating to camera operations.
[Home position]
A preset position (☞ page 67) can be set as the home
position.
When a preset position is set as the home position, "H"
will be displayed next to the preset position number.
Default: Off
Note:
• To move the camera to the home position when the
power of the camera is turned on, select "Home
position" for "Self return".
[Self return]
When the time set for "Self return time" has passed
after manual operations of the camera, the camera will
automatically be in the selected mode.
Off: Self return is not performed.
Home position: When the set time has passed, the
camera will move to the home position automati-
cally.
Auto track
SW395
passed, the camera will move to the home position
and will start the auto track function. The camera
will repeat this action (moving to the home position
and starting the auto track function) afterward.
Auto pan: When the set time has passed, the camera
will start the auto pan function.
Preset sequence: When the set time has passed, the
camera will start the sequence display.
Default: Off
Note:
• This function is also useful to automatically set the
camera in a specific mode when the power of the
camera is turned on.
• The self return function works even when the setup
menu is displayed.
[Self return time]
Select a waiting time (amount of time until the camera
starts the selected operation after the end of the man-
ual operations) from the following.
10s/ 20s/ 30s/ 1min/ 2min/ 3min/ 5min/ 10min/ 20min/
30min/ 60min
Default: 1min
[Image hold]
Select "On" or "Off" to determine whether or not to
hold the still image on the screen (that is displayed at
the last moment before the camera started to move to a
preset position) until the camera has moved to the pre-
set position.
56 56
: When the set time has
SC385