Kenwood MDX-G3 Instruction Manual page 55

7 Execution
8
Press the TIMER key on the re-
mote repeatedly until "O.T.T." is lit.
C D
EX. BASS
9
Press the POWER
switch the power off to the
STANDBY mode.
The STANDBY/TIMER indicator lights
green.
The O.T.T. timer is activated and play-
back will start when the set ON time
comes.
To cancel O.T.T. timer :
Press the TIMER key on the remote repeat-
edly until "O.T.T." turns off.
"O.T.T." lit
To re-execute O.T.T. timer with the same
setting as before :
(1)
key to
(2)
To check or change the timer setting :
Restart the procedure from step 1 again.
÷ Be sure to adjust the time of the day (page 7)
÷ When the STANDBY/TIMER indicator is
÷ The O.T.T. timer cannot be used for program
÷ Even when the O.T.T. timer is canceled, pre-
After preparing the source to be
played, press the TIMER key on the
remote repeatedly until "O.T.T." is lit.
Press the POWER
the power off to the STANDBY mode.
before using the timer functions.
blinking in green, the timer setting or clock
setting is erroneous. Check and correct them
as required (pages 7 & 54).
playback of CD or MD.
viously made setting is stored in memory and
remains until new timer information is set
the next time.
Continued on next page \
key to switch
55
EN