3. Mark the "Correct skewed character strings automatically" checkbox.
4. Click the [OK] button.
5. Click the [Apply] button in the "ScanSnap Manager -Scan and Save Settings" window.
⇒
The setting takes effect the next time you scan documents.
Up to +/-5 degrees of skew can be corrected.
ATTENTION
This function detects a skew of the document based on the character strings
on each sheet. Therefore, the detection may fail if the following kinds of
documents are scanned:
•
Documents on which the pitches of lines or characters are extremely narrow,
or adjacent characters contact with each other
•
Documents with many outlined or decorated characters
•
Documents with many photographs or figures and fewer characters
•
Documents with characters in patterned background
•
Documents with characters printed in various directions (e.g. plans)
•
Documents with long diagonal lines
•
Documents with handwritten characters
*When you scan such documents, clear the checkbox.
6.1 Using ScanSnap Manager
ScanSnap S300M Operator's Guide
6
145