Admin Settings
If you select this, the password input window is displayed.
To change the administrator settings, you should input the password. The default administrator password is "1234".
Enter the password to display the administrator sub-menu options.
Call Settings
General
•
Maximum Call Time: Enter the Maximum Call Time from 1 minute to 99999 minutes. After the entered minutes, the system will lose the
call automatically.
•
Maximum Bandwidth: Select the maximum amount of network bandwidth to use for video call.
•
Outgoing Protocol: Select the protocol to use when attempting to outgoing Call. You can choose H.323, SIP, or Auto. If you select H.323
or SIP, you can make a call selected value. If the far site user does not enable the same protocol, you can't connect to the far site. If you
selected Auto, you are able to connect moderately with the far site setting. (H.323 is tried before the SIP. If H.323 does not connect, a SIP
call is attempted automatically.)
•
SIP Transport Protocol: Select the transport protocol to use during sip outgoing call. You can choose TCP, UDP, or Auto. If you select
TCP or UDP, you can make a SIP call with the selected value. If the far site user does not enable the same transport protocol, you can't
connect to the far site. If you select Auto, you are able to connect moderately with the far site.
Installation
29
3