Installing The Dyo Dual Drive - Epson DYO-211/212 (FDD User Manual

Installing the DYO Dual Drive

This section explains how to install your DYO 211 or 212 dual
drive into your computer.
You will use the following procedures for installing the DYO
dual drive. These procedures are described in detail in the
sections that follow.
Installing the PCMCIA controller card-use this procedure
to install the option card that controls the dual drive's
PCMCIA drive socket (if you are installing a DYO 212
drive, your controller card comes equipped with a second
PCMCIA drive socket as well)
Installing the drive-use this procedure to mount the dual
drive into a 5.25-inch drive bay. As part of this procedure,
you connect one end of the PCMCIA drive ribbon cable
before you mount the drive in case your computer's drive
bay prevents you from connecting the cable after you
mount the drive.
Connecting the diskette drive ribbon cable and power
supply cable-use this procedure to connect the computer's
power supply to the dual drive and the diskette drive
controller on the system board to the dual drive's diskette
drive
Connecting the controller card-use this procedure to
connect the dual drive's PCMCIA drive socket to the
PCMCIA controller card.
5