What To Do If - Electrolux EOC5651CAX User Manual

32 www.electrolux.com

WHAT TO DO IF...

WARNING!
Refer to "Safety information" chap-
ter.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The lamp does not oper-
ate.
The pyrolytic cleaning
does not operate (the
clock display shows "C1").
The pyrolytic cleaning
does not operate (the time
display shows "C3").
The display shows C2.
The display shows F102.
Problem Possible cause
The appliance is deactiva-
ted.
The clock is not set.
The necessary settings are
not set.
The automatic cut-out is
activated.
The fuse is released.
The lamp is defective.
You did not remove the
shelf support/telescopic
runners.
You did not fully close the
door, or the door lock is
defective.
You did not remove the
core temperature sensor
plug from the socket be-
fore you tried to start the
pyrolytic cleaning or de-
frost function.
• You did not fully close
the door
• The door lock is defec-
tive.
Remedy
Activate the appliance.
Set the clock. Refer to
"Setting the time".
Make sure that the set-
tings are correct.
Refer to "Automatic
switch-off".
Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact a
qualified electrician.
Replace the lamp.
Remove the shelf support/
telescopic runners.
Fully close the door.
Remove the core temper-
ature sensor plug from the
socket.
• Fully close the door.
• Deactivate the appli-
ance with the house
fuse or the safety switch
in the fuse box and acti-
vate it again.
• If the display shows
F102 again, contact the
Customer Care Depart-
ment.