Screen Saver; Display Brightness; Tone Settings - Nokia 6100 - Cell Phone 725 KB User Manual

For more information and availability of an operator logo via SMS, MMS or WAP, contact your network
operator and/or WAP service provider, and see also PC Suite on page 117.

Screen saver

Digital clock screen saver is used for power saving in standby mode. It is activated when no function of
the phone has been used for a certain time. Press any key to deactivate the screen saver. Screen saver is
also deactivated when the phone is out of the network coverage area.
Press Menu, and select Settings,
which the digital clock display will be activated. The length of the timeout can vary from 5 seconds to
60 minutes.
Note that the screen saver overrides all the graphics and texts on the display in standby mode.

Display brightness

You can change the display contrast level used on the phone display.
Press Menu, and selectSettings,
decrease and increase the contrast level, and press

Tone settings

Press Menu, and select
menu, see Profiles (Menu 4) on page 72. Note that the settings you make, change the settings in the
active profile.
Select Incoming call alert
are Ringing, Ascending,
Display settings
Display settings
Settings and then Tone
to select how the phone notifies you of an incoming voice call. The options
Ring once, Beep once
and Screen saver timeout. Select the timeout after
and Display brightness. Scroll with
OK to accept it.
settings. You can find the same settings in the
and Off.
Copyright © 2003 Nokia. All rights reserved.
and to
Profiles
80