Panasonic DX 1000 - PanaFax B/W Laser Printer User Manual page 169

08001000001
Info.
Code
08001080016
631 During dialing, STOP was pressed.
#@multitude
634 Redial was not successful due to a busy line or no
08001080056
response from the called station.
08001080057
638 Power failure occurred during the communication. Check the power cord and plug.
712 Incorrect email address.
08001080058
713 Memory overflow in the LAN Interface.
714 Cannot logon to the LAN.
715 TCP/IP connection timed out.
716 Cannot logon to the designated SMTP Server.
717 Incomplete SMTP Protocol transmission. SMTP
Server's hard disk may be full.
718 Page Memory Overflow occurred while receiving
printing data. The paper size selected within your
application to print is larger than the paper size
loaded in the cassette(s).
719 Received data via LAN is in a format that is not
supported.
720 Cannot connect to the POP Server.(Incorrect POP
Server IP Address) POP Server is down.
721 Cannot connect to the POP Server.(User Name or
Password error)
725 DNS Server connection timed out. DNS Server is
down.
726 Received an error response from the DNS Server. Check the POP Server Name. Check the SMTP
730 Cannot program the Auto Dialer remotely via email
from a PC.
731 The dialer buffer for manual dialing was full (50
stations) when the Relay Transmission Request
was received.
08001080131
870 Memory
documents into memory for transmission.
08001080059
879 Memory
documents into memory.
Receiving documents with data that is greater than
08001080074
the memory size.
975 DRAM parity error. The document information in
memory is lost.
08001080062
Note:
After identifying the problem and verifying the recommended action, if the Information Codes keep reoccurring
or for help on Information Codes that appear on your machine but are not listed above, please contact your local
Panasonic Authorized Dealer.
08001070017
Meaning
overflow occurred while
overflow occurred while
Troubleshooting
Reload the document and send again.
Reload the document and send again.
Check the registered email address. Check the IP
Address of the SMTP Server with the Network
Administrator.
The document data exceeded 1.6 MB/page and
cannot be sent.
Check the 10Base-T cable connection. An
unexpected LAN problem occurred. Contact the
Network Administrator.
Check the Internet Fax parameter settings. Verify
the IP Address, Default Router IP Address,SMTP
Server IP Address.
Check the SMTP Server IP Address setting.
Contact the Network Administrator.
SMTP Server is defective. Contact the Network
Administrator.
Check the document size and resolution. Ask
originator to re-send in a supported size and
resolution.
Ask the originator to re-send with a supported file
attachment format: * In a TIFF-F format. * Image
data conforming to A4/Letter size.
Check the POP Server IP Address. Contact the
Network Administrator.
Check the POP User Name and Password.
Contact the Network Administrator.
Check the DNS Server IP Address. Contact the
Network Administrator.
Server Name.
Check that the Fax Parameter No. 91 is set to
"2:Valid".
Request the originator to re-send the Relay
Transmission Request
communication is finished.
storing Transmit documents without storing into memory.
receiving Check recording paper and toner cartridge.
1. Unit will print out a Power Failure Report.
2. Resend the lost document.
Action
after the reserved
Page
--
--
32
--
--
--
--
8
--
--
--
--
--
--
--
--
64
--
85
28
30
160
165