Cisco AIR-PCI340 Installation And Configuration Manual page 267

Appendix E Configuring the Client Adapter through the Windows XP Operating System
Figure E-4
Step 5 Select the Use a certificate on this computer option.
Step 6 Check the Use simple certificate selection (Recommended) check box.
Step 7 Check the Validate server certificate check box if server certificate validation is required.
Step 8 If you want to specify the name of the server to connect to, check the Connect to these servers check
box and enter the server name in the field below.
Note
Note
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Smart Card or Other Certificate Properties Screen
If you enter a server name and the client adapter connects to a server that does not match the
name you entered, you are prompted to accept or cancel the connection during the authentication
process.
If you leave this field blank, the server name is not verified, and a connection is established as
long as the certificate is valid.
Configuring the Client Adapter
E-11