Using the digital electronic programme guide
05
Using the Digital EPG
Using the Digital EPG you can check the schedule of
digital TV programmes, view information about desired
programmes, and/or select programmes.
1
GUIDE
Press to display the Digital EPG screen.
The EPG screen updates automatically if the EPG data is
acquired successfully. If not, the Digital EPG screen
shows a blank image.
2
Select a TV programme.
D007
• Press
/
previous channel list page.
• Information about the selected programme appears
in the information window.
• To watch a programme currently on air, select the
programme (then press ENTER).
• You can check information about programmes
scheduled up to one week ahead, depending on
conditions.
• Depending on conditions, it may take some time to
acquire EPG data.
3
Press to view more information about the
INFO
selected programme.
Detailed information appears in the schedule window.
If the screen contains further information, More ... is
displayed.
Note
1 The general programme list does not show programmes that have already finished.
2 For more information on timer programmes, see About timer recordings on page 98.
86
En
(LCD page 1) to skip to the next or
1
• To quit the display of detailed information, press
INFO again (or RETURN).
D007
************
*************
**************************
4
GUIDE
Press to exit the Digital EPG screen.
Setting timer programmes
Using the Digital EPG, it's easy to set digital TV
2
programmes for recording
1
GUIDE
Press to display the Digital EPG screen.
ENTER
2
Select a programme.
D007
• Select a programme currently on-air: press ENTER to
close the Digital EPG screen and watch the channel
immediately, or press RED to set the programme for
recording immediately.
• Select a programme not yet started then press
ENTER or RED to set the programme for recording.
13:40 -
14:05
More...
.