Safety Warnings and Cautions
Chapter 1 Safety Warnings and Cautions
Chapter 1
I Always observe SAFETY WARNINGS and CAUTIONS, which are intended to ensure safety while
repairing or operating the product.
I Hazards are separated into Warnings and Cautions, as explained below.
Warning
Caution
Use Caution to prevent electric shock.
• The control board (Main PCB) uses 310 V.
When replacing PCB parts, wait at least 3
minutes after unplugging. Always unplug the
storage before repairing.
Do not allow the consumer to repair,
disassemble, or modify the storage.
• There is a risk of damage, injury, electric
shock, or death.
WARNING means a dangerous condition which could result in significant
damage, injury, or death if the instructions are NOT followed.
CAUTION means condition which could result in damage or injury if
instructions are not followed.
Warning
Make sure that the power plug is not
pressed by the back of the storage.
• Power plug may be damaged and cause a fire
or electric shock.
Use a dedicated circuit.
• This storage should be installed on a dedicated
circuit. Overloading circuits or outlets could
cause a fire.
3