Set Up; Safety Precautions; General Operating Conditions; Basic Computer Configuration - Pioneer DRM-5004X User Manual

3. Setting Up the DRM-5004X
Basic Two-Reader Configuration
This chapter describes how to properly unpack, set up and test the
DRM-5004X and the two Pioneer CD-ROM Readers, DR-D504X, that
typically ship with the unit. This is a standard two drive configura-
tion. These are instructions for setting up and testing the standard
configuration up to the point of connecting a computer to the unit.
3.1

Safety Precautions

Before you begin to set up the DRM-5004X, thoroughly review the
safety precautions described on page ix of this manual. This safety
information is intended to protect users from injury and to protect the
DRM-5004X and its components from damage.
3.2

General Operating Conditions

The following conditions for temperature and relative humidity should
be met for operating and storing the DRM-5004X:
Temperature and Relative Humidity
Operating (non-condensing)
Temperature
Humidity
Max. Wet Bulb Temperature
Storage (without media, non-condensing)
Temperature
Humidity
Max. Wet Bulb Temperature
3.3

Basic Computer Configuration

The DRM-5004X is run by specific software applications. Consult
third party software developers for minimum computer configuration
needed to run software and the DRM-5004X. Refer to Pioneer
Product Information Bulletin #25, Third Party Driver Developers,
LaserFacts Document #31 025.
Pioneer DRM-5004X CD-ROM Jukebox User's Guide
0 0
5 ~ 40 C/ 41 ~ 104 F
(Maximum gradient of 10
C/Hour)
10 ~ 80% RH (Maximum
gradient of 10% RH/Hour)
0
29 C
0
-20 ~ 50 C (Maximum gra-
0
dient of 15 C/Hour)
10 ~ 90% RH
0
29 C
TP #120 v .1.0 2/95

Set Up

3
0
3 - 1