Panasonic KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008 Ports Programing Manual page 13

[Example of Entering Characters]
To enter "Ann":
A
2
Note
•
To erase the character on the cursor, press CLEAR.
•
To move the cursor to the left, press
•
To move the cursor to the right, press
button consecutively (e.g. "G" and "I"), you must press this button or the FWD/DND button after entering
the first character.
•
If SELECT is pressed, the characters for each button will be displayed in reverse order.
•
To toggle between Table 1 and Table 2 when using the KX-NT300/KX-DT300/KX-T7600 series, press
the leftmost soft button.
Document Version 2008-11
n
6 (5 times)
OR
FWD/DND
n
6
(5 times)
.
. When entering two or more characters that use the same
1.1.3 Entering Characters
PT Programming Manual 13