Other trademarks and trade names may be used in this publication to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
Page 3
Dell OptiPlex FX130 & FX170 VESA Mount Manual WARNING: Before beginning, turn off the thin client, disconnect the AC adapter from the electrical outlet and the thin client, and remove any other external cables from the thin client. WARNING: Before installing your thin client in an enclosure, read the safety instructions that shipped with your thin client.
VESA Bracket Remove the middle button on of the side plate on your thin client that has three mounting holes. NOTE: Only one side plate has three mounting holes.
Page 5
Place the VESA mounting plate on the thin client’s side plate chassis and insert the screws to secure the mounting plate to the thin client.
Page 6
Insert the screws to secure the VESA bracket. NOTE: The VESA mount above is secured to the back of a monitor. Make sure the mounting bracket is secured as shown above. Slide the VESA mounting plate attached to your thin client onto the VESA mounting bracket.
Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: Visit support.dell.com and verify your country or region in the “Choose a Country/Region”...
Page 8
Printed in the U.S.A. www.dell.com | support.dell.com...