Search for a destination
Nearest POI search
Search for POIs in the area around the current position,
the destination and the last map displayed.
1 Select [Nearest POI] from the
Destination menu (All).
The Nearest POI search screen is displayed.
2 Select the point for the center of the
search.
[Current Position]: Current position screen
[Map]:
[1]/[2]/[3]/[4]/[5]: Destination and transit
[1]/[2]/[3]/[4]/[5] are displayed according to the
number of a destination and transit destinations
set.
If [Current Position] is selected
Go to step 4
3 Move the cursor to the center of the
area to search and select [Enter].
4 Select a main category.
Select [List all categories] to display the
sub-categories within all main categories.
44
44
Last displayed map
destinations
(continued)
5 Select a sub-category and select
[OK].
Up to 5 sub-categories can be selected.
To cancel a selected sub-category, select it
again.
6 Select [Show list].
POIs within a radius of 20 miles (32 km*) of the
search position (the current position or the cursor
position on the Map mode screen) are searched
for and listed in order of proximity to the current
position. Up to 200 matches can be made.
* This is the range when "km" is set as the
distance setting
(
To re-select sub-categories, select [Select
category] and repeat from step 4.
7 Select the POI from the list.
The map is displayed.
The displayed distance is the straight distance
from the vehicle position to the POI.
Select [Sort by] to sort the list.
[Distance]: The list is sorted in order of
proximity.
[Category]: The list is sorted by category.
[Name]:
The list is sorted in alphabetical
order.
Select [On route] to search for POIs along the
guidance route.
(
page 45)
[On route] is not displayed if route guidance is
not in use.
page 84).