Operation Before Using The Disc Or Card - Panasonic Viera TC-22LR30 Operating Instructions Manual

Before Using the Disc or Card
OPEN/CLOSE
Front view
DVD SD
Indicator Indicator
Before using Disc/Card Functions
1
Confirm that disc or card is inserted.
2
Press DVD or SD to select the drive.
• The "DVD" or "SD" indicator flashes on the Front Display.
• The DVD or SD indicator on the unit lights.
3
Each operation is carried out.
Inserting a Disc
1
Press OPEN/CLOSE on the unit to open the tray and
insert a disc.
• Press the button again to close the tray.
Non-cartridge disc
34
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
DRIVE SELECT
–DVD
DRIVE SELECT
–SD
Front Disc Tray SD Card Slot
Display
Or
Insert label-up.
Cartridge disc
Disc tray
Notes:
• Load double-sided discs so the label for the side you want to record/play is
facing up.
• When using 8 cm (3˝) DVD-RAM, remove the disc from the cartridge and
insert it, making sure you align it with the groove.
Inserting/Removing the Card
Only insert or remove the card after turning
the unit off.
When the "SD" indicator on the unit display is flashing, the card is
being read from or written to. Do not turn off the power or remove
the card. Such action may result in malfunction or loss of the
card's contents.
Inserting the Card
Insert the Card (labeled side up, cropped corner
right) and hold in place until you here a click.
Removing the Card
Press the center of the Card and then pull it
straight out.
Insert inside the tray's guide.
Insert label-up with the
arrow facing in.
cropped corner