Cisco 2611 - Router - EN User Manual page 66

Opening the Chassis
DRAM DIMM Installation
Take the following steps to install the DRAM DIMMs:
Step 1
Step 2
Step 3
Step 4
Caution
DIMM carefully.
B-6 Cisco 2600 Series Hardware Installation Guide
Power OFF the router.
Attach an ESD-preventive wrist strap.
Open the cover following the instructions in the "Opening the Chassis" section
on page B-3.
Remove the existing DRAM DIMM by pulling outward on the connectors to
unlatch them, as shown in Figure B-4. Be careful not to break the holders on the
DIMM connector.
To prevent damage, do not press on the center of the DIMMs. Handle each