Contents AT2010 / AT2011 Important safety instructions Disposal instructions User's Guide First things first Basic features and benefits of your Acer LCD TV Packing checklist Your LCD TV overview Front panel view Rear / Bottom panel view Remote control General keys...
Page 2
All correspondence concerning your unit should include the serial number, model number, and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording, or otherwise, without the prior written permission of Acer Incorporated.
The Low Voltage Directive 73/23/EEC as attested by can be determined by turning the device off and on, the user conformity with the following harmonized standard: is encouraged to try to correct the interference by one or...
First things first We would like to thank you for making the Acer LCD TV your choice. With proper care, your new Acer LCD TV will provide you with years of entertainment and satisfaction. This User's Guide introduces you to the various features your LCD TV can offer, and provides clear and concise information about the product, so please read it thoroughly and retain it for future reference.
Menu key Channel up / down Power On / Off Volume up When the OSD is on, functions the same as the Right arrow Volume down When the OSD is on, functions the same as the Left arrow Input key...
Press to select correct input mode. SLEEP Press to set a time period after which the TV will switch itself to standby ( 15, 30, 45, 60, 90 or 120 minutes ). 10 FREEZE Press to freeze the displayed picture.
Press to switch from TV/AV to Teletext mode. SIZE Press once to zoom teletext page to 2X. Press again to resume. Press to overlay teletext page on the TV image. HOLD Press to pause the current teletext page in multi-page viewing mode.
Basic connections Connecting the power cord Connect the AC cord into the AC input on the back of the set. Connect the plug to the wall outlet as shown. Setting up the remote control Open the cover on the back of the remote unit.
Press the OK key to begin the setup process. You can also adjust these settings using the front control panel. Please see "Front panel view" on page 6 for details. AT201X.EU.UK.indb 11...
Step 4. Scan for analog channels. Step 5. Setup is now complete. You are ready to begin watching TV. If you leave the setup process before it is complete, you will be given a choice of options: 1. Resume setup at next startup 2.
Pressing the channel ( CH ) up / down button on the remote control will also change the channel. Adjusting the volume Adjust the volume level using the ( VOL ) + / - button on the remote control. Setup may vary due to local broadcast differences.
Connecting external audio/video devices Connecting a DVD, VCR, STB or audio/video equipment Connect your DVD player, VCR or audio/video equipment using the SCART port located at the rear of your LCD TV as shown below. Source-IN AT2011 AT2010 Audio Yellow...
D-Sub D-Sub For VGA input, Acer recommends setting your PC’s external monitor resolution to 1280 x 768 pixels @ 60 Hz refresh rate. Selecting the input source Once you have connected your antenna or external equipment to the TV, you need to select the correct input source.
Navigating the OSD with the remote control MENU You can also interact with these menus using the front panel controls. Please see "Front panel view" on page 6 for details. There are six main OSD menus. These are: Picture, Audio, Channel management, Options, Settings and Empowering.
The OSD can be used for adjusting the settings of your LCD TV. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, audio settings, channel settings, general settings and the Empowering Technology settings. For advanced settings, please refer to following page: Adjusting the picture quality Press the MENU key to bring up the OSD.
More than 2 seconds The Empowering Key opens up the Acer Empowering Technology functions. In TV mode, the choice is between Scenario mode and Favourite channel; see page 19 for details. The default setting for both modes is Scenario mode.
Favourite channel mode in TV Favourite channel allows you to store five of your favourite TV channels and flick between them at the touch of a single button. To set Favourite channel as the default, follow the steps described on page 18.
PIP (Picture-in-Picture) PBP (Picture-by-Picture) 1. For a list of the available sources for this feature, please refer to the appendix at the end of this manual. 1a. Press the ACTIVE key to toggle between PIP screens. 1b. Press the TV, SCART, AV or PC keys, number keys or CH up or down to change the content of the active screen.
Page 21
1a. Press the ACTIVE key to toggle between PBP screens. 1b. Press the TV, SCART, AV or PC keys, number keys or CH up or down to change the content of the active screen. 2. Press the SWAP key to change the content between the primary and the PBP screen.
Page 22
Re-scan for channels The first time you completed the setup wizard, all available channels were listed. If you need to re-scan for new channels, please follow the steps below: MENU Scanning for channels MENU Press the MENU key on the remote control to bring up the OSD.
Widescreen display mode Your Acer LCD TV has a special widescreen mode that allows you to toggle between 4:3, 16:9, Panorama, and Letterbox 1, 2 and 3. type views. Press the WIDE key on the remote control to toggle the display between the four wide modes.
Before you call the Acer service center, please check the following items: Here is a list of possible situations that may arise during the use of your LCD TV. Easy answers and solutions are provided for each. There is no picture or sound.
Wall Mounting Analog TV system TV Colour system PAL, SECAM, NTSC Sound system B / G / D / K / I / L ( multi-European ) Stereo system NICAM / A2 TV Tuner System PLL, 45.25 Mhz - 862.25 Mhz Subtitles Teletext 1.5...