Table of Contents
Advertisement
Pay attention to Chapter 3 "Safety" during maintenance and repair works.
Failures due to inadequate or incorrect maintenance may generate very high repair costs and long standstill
periods of the machine. Regular maintenance therefore is imperative.
Operational safety and service life of the machine depends, among other things, on proper maintenance.
The following table shows recommendations about time, inspection and maintenance for the normal use of the
machine.
Operating hours/
time period
12 h after repairing
Every 3 hour
Daily and prior to
starting work
Every 3 months
Annually
The time indications are based on uninterrupted operation. When the indicated number of working hours is not
achieved during the corresponding period, the period can be extended. However a full overhaul must be
carried out at least once a year.
Due to different working conditions it can't be foreseen how frequently inspections for wear check's,
inspection, maintenance and repair works ought to be carried out. Prepare a suitable inspection schedule
considering your own working conditions and experience.
Our specialists will be happy to assist you with more advice.
Prior to any repair works on the machine and its drives, secure the machine against
unintentional switching on. Put the machine to its safety off position.
The machine is in a safe condition when it cannot generate any hazard.
Follow additional operating and maintenance of OEM if included
during your service and maintenance work.
Further is advised:
6. Maintenance
Inspection points, maintenance instructions
Check all accessible screw connections for tight seat.
Check the separator tray, the hopper, the feed spout and blast wheel
unit for foreign matter and large contaminants.
Check that all safety devices working adequate.
Check the feed spout, and abrasive sealing.
Check the blastwheel, control cage and liners.
Check the electric connections for sediments of dirt or foreign bodies.
Check the electric motors for dirt and other contaminants.
Check the function of the residual current operated device.
Check the hose connections for tightness and fixed seat.
Check all hoses on the machine for damages or leakage.
Make sure that the dust bin is emptied
Check the tension of the V-belts
Full overhaul and cleaning of the complete machine.
23
Advertisement
Table of Contents
