Removing the ice cube maker
Remove and empty the ice cube
1.
tray
and the ice storage
container .
→ Fig.
17
Press the push-button
2.
the ice cube maker from the
holder and remove the ice cube
maker .
→ Fig.
18
Lift the rear end of the holder and
3.
lower it behind the freezer com-
partment shelf . Remove the
holder towards the front .
→ Fig.
19
13.4 Removing appliance
components
If you want to clean your appliance
thoroughly, you can remove certain
components from your appliance.
Shelf above the fruit and
vegetable container
You can remove the cover of the fruit
and vegetable container in order to
clean it thoroughly.
Removing the shelf above the fruit
and vegetable container
Remove the fruit and vegetable
1.
container. → Page 24
Remove the storage container.
2.
→ Page 24
Tilt the shelf above the fruit and ve-
3.
getable container to the side
and remove it
→ Fig.
20
Lift the fruit and vegetable con-
4.
tainer cover
→ Fig.
21
Fitting the shelf above the fruit and
vegetable container
Clip the fruit and vegetable con-
1.
tainer cover in place.
→ Fig.
22
to release
.
and remove it
Tilt the shelf above the fruit and ve-
2.
getable container to one side to in-
sert it
→ Fig.
Move the humidity controller to the
3.
front.
→ Fig.
Make sure that the fruit and veget-
able container cover sits in the
opening under the humidity con-
troller.
Insert the storage containers and
4.
the fruit and vegetable container.
→ Fig.
.
Cleaning and servicing en
and then lower
23
24
25
.
25