Table of Contents
Advertisement
UD-300
DISASSEMBLY FOR REPAIR
1) How to Remove Tray
1. Turn the power switch to OFF when the tray is open
condition (@).
2. Remove the screws ( @) and clamper ass'y.
3. Remove
the screw
(€) and guide. And then re-
move the tray.
2) Howto Remove the Tray When Power
Switch is OFF or Tray Not Come Out
1. Insert the driver to the right-side hole of mechanism
ass'y (Q).
2. Tray can be pulled out (@).
3) How to Mount the Tray
1. Meet the mark on the gear with that of mechanism
chassis (@).
2. Insert the tray to both-side guide on chassis (@).
3. Mount the guide on the chassis with screw (@).
12
Advertisement
Table of Contents
