Notes For Installation - Sharp AF-X7BCA Operation Manual

Notes for installation

Remove
Before removing air conditioner to the other place, you
Then it must be done under the direction of the
professional technician. In addition, the charge of this
mustbe paid.
Noise
enlargement of noise and vibration.
● Don't put anything in front of the outlet of the unit
to avoid increasing noise.
● Be sure that hot air or noise will not inconvenience neighbors.
● Please contact the seller as soon as there is strange noise during operation.
● Please use the safety support.
Electric wiring
● Must connect with ground reliably.
● The exclusive circuit must be used. But removable socket
can't be used because poor contact of it can cause over heat
● Don't pull the power cord strongly.
and leakage current is less than 30mA.
● Connecting method between air conditioners and power cord and
interconnecting method of each individual element with one another should
accord with wiring diagram on the unit.
● The air conditioner should be installed in accordance with national wiring
regulation.
● An all-pole disconnection switch having a contact separation of at least 3mm
● Air switch (thermal-magnetic breaker) should be installed in the circuit and
its capacity is 10A (9K、12K) / 16A (18K).
● If the supply cord is damaged,it must be replaced by the manufacturer or
● All The electrical work must be done according to the local wiring regulations.
- 14 -