Miele EGW 4060-14 Operating Instructions Manual page 17

JnstaJJation
mnstallation Safety mnstructions
Before ,nsta,,ation make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This data
must correspond in order to avoid risk
of damage to the appliance. If in doubt,
consult a qualified technician.
The electrical outlet should be
easily accessible after installing the
uniL
Only install the plate warmer in
1:
comb,nat_on w_th bu,,t-in
appliances recommended by the
manufacturer. When installed with other
appliances, the warranty is void since
the manufacturer cannot guarantee the
safe use of the plate warmer.
To ,nsta,, the p,ate warmer ,n
combination with another
appliance, a built-in shelf must exist in
the cabinet to support the weight of
both appliances.
When installed in combination with
another appliance, the plate
warmer must always be installed
beneath the other appliance. The
combination appliance can be set
without a base directly onto the plate
warmer. A shelf between the
appliances is not necessary.
To install the combination
11
app,ianoe p,ease see t he manua,
supplied with that machine.
This appliance is not designed for
ii_ maritime use or for use in mobile
installations such as recreational
vehicles or aircraft. However, under
certain conditions it may be possible for
an installation in these applications.
Please contact the Miele Technical
Service Department with specific
requirements.
BuHtdn measurement
The appliance is available in two
heights: The opening measurement
needed is the summary of the
measurement of the plate warmer and
the combination appliance.
17