Advertisement
Accessory
Slide the Open/Close lock (shaded area) to lock and unlock.
Locked
Unlocked
Note: Do not try to force open when locked. This may damage the product.
If the temperature setting is on 230°C, 200°C, or 180°C and the straightener is left unused for approximately 10 minutes, the temperature will automatically lower to 170°C.
The indicator light will blink alternately between 230°C, 200°C, or 180°C and 170°C
Once the straightener is used again, or the [-] or [+] temperature setting switches are pressed, the temperature will return to 230°C, 200°C, or 180°C.
The 230°C, 200°C, or 180°C light will blink and then light up. (Depending on use, it may light up without flickering.)
Note: Place hair in the center of the iron plate to use. (If hair is placed on edge of the iron plate, the straightener may not be able to detect it is in use.)
This unit will automatically turn off when 60 minutes have passed from the start of use.
The power will shut off even if you are using this unit, so in this event, please turn on the power once again.
After using this unit, even if you forget to shut off the power, after 60 minutes have passed, it will automatically turn off.
nanoe™ is ion particles enveloped in water and is not visible to the naked eye. Since nanoe™ is generated by collecting water in the air, it may be difficult to generate in certain cases depending on the environment. This is due to the fact that water in the air is difficult to collect when the temperature and humidity level is low. This is when negative ions are generated. (nanoe™ and negative ion generation method: High-voltage discharge)
Generally hair has properties which make it easy to become positively charged with electricity. These properties attract strongly negatively charged nanoe™ which penetrates the hair with moisture. Furthermore, they make the hair slightly acidic, tighten cuticles and keep your hair strong, elastic and healthy.
Notes
Start styling from the bottom on the back of your head in the order of 1 to 2 [3 to 4 as well].
Hair types and straightening guidelines
The hair straightening effect may differ among individuals by the degree of curliness and hair type.
About hair-straightening products
Do not use the straightener immediately after a home straight perm liquid is used. Doing so may damage your hair. (The straightener may be used 3-4 days after a straight perm liquid. The straightener may also be used 3-4 days after having your hair treated at a beauty parlor.)
About dyeing products
Indicator | Temperature | Hair type | Hair condition |
230 | Approx. 230°C | Wavy Straight | Less damaged Damaged |
200 | Approx. 200°C | ||
180 | Approx. 180°C | ||
170 | Approx. 170°C | ||
150 | Approx. 150°C |
Notes
Before use, confirm that the Temperature Setting Lamp has stopped blinking and glows.
Notes
Clean the straightener after it has cooled and with the plug removed from the household outlet.
Problem | Possible cause | Action | |
| Dust, styling products, etc. are adhered to the pin-shaped portion where nanoe™ is generated. | Clean the nanoe™ Outlet to remove any adherents. | |
When the temperature is set to [230], [200], or [180] it blinks alternately between 230°C, 200°C, or 180°C and 170°C. | It is on standby mode. | When resuming use, press the [+] or [-] temperature setting switches and return the temperature setting to 230°C, 200°C, or 180°C. | |
All temperature setting lamps keep blinking. | Please request an inspection or repair from place of purchase. | ||
It takes time to reach operating temperature. | The time to reach operating temperature (approximately 100°C) differs depending on the area. 100 - 120 V: about 30 seconds 220 - 240 V: about 30 seconds |
If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorized by Panasonic for repair.
Power source | 100 - 120 V50 - 60 Hz | 220 - 240 V50 - 60 Hz |
Power consumption | 38 W |
The amount of power consumption is determined as the arithmetic mean value of the power input occurring during a representative period.
This product is intended for household use only.
For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 13-ampere and that it is approved by ASTA or BSI to BS1363.
Check for the ASTA mark or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained.
A replacement fuse cover can be purchased from your local dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET.
THIS PLUG IS NOT WATERPROOF — KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
To reduce the risk of injury, loss of life, electric shock, fire, and damage to property, always observe the following safety precautions.
Notice
The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed.
Denotes a potential hazard that could result in serious injury or death.
Denotes a hazard that could result in minor injury or property damage.
The following symbols are used to classify and describe the type of instructions to be observed.
This symbol is used to alert users to a specific operating procedure that must not be performed.
This symbol is used to alert users to a specific operating procedure that must be followed in order to operate the unit safely.
Illustrations in "Safety precautions" may vary from the actual product.
Do not store within the reach of children or infants.
Do not let them use the appliance.
Never modify, disassemble, or repair.
Do not use in a way exceeding the rating of the household outlet or the wiring.
Do not damage or modify, or forcefully bend, pull, or twist the cord.|
Also, do not place anything heavy on or pinch the cord.
Do not use with the cord bundled.
Do not wrap the cord around the main body when storing.
Do not use when the plug or cord is damaged or hot.
Never use the appliance if the plug fits loosely in a household outlet.
Do not connect or disconnect the plug to a household outlet with a wet hand.
Do not use the appliance with a wet hand.
Do not leave the appliance unattended with the power connected or after use while the Iron Plate is still hot.
Do not store the appliance in a bathroom or location with high humidity. Also, do not place in a location where water may spill (such as top of a vanity).
Do not use in proximity of flammable materials (such as alcohol, benzine, thinner, spray, hair care product, nail polish remover).
Do not apply hair spray or flammable hair product to the main body or hair while using the appliance.
Do not immerse the appliance in water.
Do not use this appliance near water.
Do not block or insert foreign objects such as hairpins into the nanoe™ Outlet.
Immediately stop using and remove the plug if there is an abnormality or malfunction.
<Abnormality or malfunction cases>
Fully insert the plug.
Always ensure the appliance is operated on an electric power source matched to the rated voltage indicated on the appliance.
Always turn OFF the Power Switch and disconnect the plug from the household outlet after use.
Regularly clean the plug to prevent dust from accumulating.
When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off.
Do not store the cord in a twisted state.
Do not drop or subject to shock.
Do not use on infants.
Do not touch the shaded areas when in use or right after use since they will be hot.
Do not let the heated section touch the skin (ears, forehead, neckline, etc.).
Do not forcefully open the Press Plate.
Do not use the appliance with permanent wave liquids applied to your hair.
Do not use the appliance for any purpose other than the care of human hair. (Do not use on pets, etc.)
Do not use the appliance on the same section of hair for more than 2 times.
Disconnect the plug from the household outlet after use.
Hold the main body so the fingers do not touch the shaded areas during use.
Disconnect the plug by holding onto it instead of pulling on the cord.
Slide the appliance down entirely through of your hair without stopping.
Only use the appliance on clean, dry and tangle-free hair.
Recommended temperature for use depends on each hair type of condition.
Notes
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the nanoe EH-HS99 that isn't answered in the manual? Leave your question here.