Advertisement
Accessories
There may be water droplets inside the self‑cleaning recharger at the time of purchase, but there is no problem regarding the hygiene. They are remains from the factory inspection.
Quick charge
Even though the battery runs out, you can shave once after 3‑minute charge.
(This will differ depending on usage.)
While charging
glows.
The number of the battery capacity lamp will increase as charging progresses.
After charging is completed
"100%" appears and then turns off after 5 seconds.
Notes
Note
You cannot operate the shaver while charging.
Cleaning can start right after the usage by preparing in advance.
Notes
This appliance has a smart lock function, so the power switch is automatically locked to prevent accidental operation when not shaving.
Unlocking the power switch
The power switch is automatically unlocked when the main body is grasped.
Locking the power switch
All the lamps turn off when releasing the main body.
The lamps glow and the power switch is automatically locked after 1 minute.
The sensor may respond and the power switch may be unlocked when an electrical device or metal object is brought closer. This is not abnormal.
Tips for better shaving
Apply the whole system outer foil perpendicularly against the skin and shave by slowly gliding the shaver over the face against the grain of the beard.
Notes
Using the trimmer
Tips for better usage
Apply the trimmer edge perpendicular to skin gently and move downward slowly.
Trimming sideburns
Pre‑shave of long beards
Switching the shaver head
You can change the pivot action.
""
The shaver head is moved to prevent missed spots.
""
You can lock the shaver head.
We recommend cleaning the shaver after each use.
Clean the shaver with water or with the cleaning brush once per month. The main unit neck section (a), trimmer, system outer foil gaps, etc. cannot be cleaned with the self‑cleaning recharger.
The "Charge" mode starts when attaching the shaver, and the mode can be changed by pressing the SELECT button.
Notes
Drying the shaver without the self-cleaning recharger.
Dry in a shade and apply oil.
Notes
Remove the outer foil section.
Clean the system outer foil in the areas indicated by the circles every time you use the shaver. Otherwise, abnormal sound may be generated.
Cleaning with the long brush
Clean the foil frame, system outer foil, the main body and the trimmer using the long brush.
appears on the lamp display once every 18 months. (Based on one 3‑minute shave use per day)
We recommend checking the system outer foil when it appears.
Press the power switch for more than 30 seconds to turn off .
Even if is not turned off right after the replacement, it will automatically turn off within approximately 7 uses.
system outer foil | once every 18 months |
Removing the outer foil section
Press the foil frame release buttons and lift the outer foil section upwards.
Attaching the outer foil section
After turning the foil frame mark () to the front, securely attach the outer foil section to the shaver until it clicks.
Replacing the system outer foil
Note
Do not throw away the foil frame.
If the STATUS lamp glows for 5 seconds when the SELECT button is pressed, the cleaning liquid needs to be replaced.
Notes
When the water does not drain from the cleaning tray
Replacement parts
Replacement parts are available at your dealer or Service Center.
Replacement parts for ES‑LS9A | System outer foil | WES9600 |
Special Detergent for Shaver Cleaning & Charging System | WES4L03 |
It indicates that the cleaning liquid is due for replacement when the LOW lamp or STATUS lamp glows for approximately 5 seconds when the SELECT button is pressed.
Lamp on the self-cleaning recharger | Content of notification |
The LOW lamp glows. | Replacement of the cleaning liquid is required in approximately 7 days. Prepare the detergent. |
The STATUS lamp glows. | Replace the cleaning liquid. (Modes other than the "AUTO" mode can be used even if it is not replaced.) |
If you think the replacement should not be due yet.
|
Question | Answer |
Does this product require inner blades? | Outer foils and inner blades are integrated into the system outer foil. |
Why does "Dry/ Charge" mode take longer than "AUTO" mode? | This is due to the difference in the drying time. The drying time for the "Dry/ Charge" mode is set longer as there may still be excess moisture on the areas other than the system outer foil after the shaver has been rinsed and cleaned with water. |
Can I refill the selfcleaning recharger with water when the cleaning liquid has decreased? | Do not refill with water as doing so may deteriorate the cleaning function. Replace the cleaning liquid. |
Can the self‑cleaning recharger be used to wash other models? | Doing so may cause malfunction, so do not use with other models. |
Will the battery deteriorate if not used for an extended period of time? | The battery will deteriorate if not used for over 6 months, so make sure to perform a full charge at least once every 6 months. |
Can I charge the shaver after every use? | The battery used is a lithium‑ion, so charging after every use will have no effect on battery life. |
Why should the adaptor be disconnected after charge? | Charging the battery for more than 1 hour will not affect battery performance, but disconnect the adaptor for safety and to save energy. |
What is the constituent of the dedicated oil and the detergent? | Oil: Liquid paraffin Detergent: Non‑ionic surfactant agent, antimicrobial agent, lubricant and fragrance. |
Why does the appliance beep twice after switched off? | The sound indicates that the battery capacity is running low. Please charge the appliance. |
Perform the following actions.
If the problems still cannot be solved or all self‑cleaning recharger's lamps blink, contact the store where you purchased the unit or a service center authorized by Panasonic for repair.
Problem | Action |
Self-cleaning recharger | |
The system outer foil has not been thoroughly washed. | If the shaver is not cleaned for more than 2 weeks, first clean with the cleaning brush to remove beard trimmings. |
Do not add detergent and water except when replacing the cleaning liquid. Doing so may deteriorate the cleaning function. | |
After cleaning, oil‑like droplets may remain on the outside of the foil frame. This is the lubricating component of the cleaning liquid and does not indicate a problem. You may wipe it off with a soft cloth. | |
The system outer foil is not dry or is sticky. | The system outer foil may not dry quickly due to temperature conditions. Run the "Dry/Charge" mode again or wipe with a soft cloth before shaving. |
The system outer foil cracks or deforms during cleaning. | Do not insert any foreign objects into the recharger. Remove foreign objects in the cleaning tray. |
Replace the system outer foil. | |
The cleaning liquid has foamed. | If you mix soapy water or hand soap with the detergent or use another detergent, the cleaning liquid will foam. Use the self‑cleaning recharger after thoroughly washing and drying the shaver. |
Replace the cleaning liquid. | |
Cleaning liquid has accumulated in the cleaning tray. | Remove any waste, etc. that has accumulated in the drain at the bottom of the cleaning tray. |
If you use the self‑cleaning recharger when the shaver is wet or when soap or shaving gel is on the shaver, cleaning liquid may accumulate in the cleaning tray. | |
Cleaning liquid leaked from the cleaning liquid unit. | Do not press the cleaning liquid unit removal button during any mode. |
Place the self‑cleaning recharger horizontally. | |
If you use the self‑cleaning recharger when the shaver is wet or when soap or shaving gel is on the shaver, cleaning liquid may leak. | |
The cleaning liquid unit cannot be removed. | Place the self‑cleaning recharger on a hard, flat surface. |
The mode does not start. | Check that the AC adaptor is connected to the self‑ cleaning recharger, and that the adaptor is plugged in to a household outlet. |
Confirm that the shaver is properly attached to the self‑cleaning recharger. | |
The Clean or Dry function may not operate under extreme low temperatures (approximately 0°C [32°F] or lower). | |
Check if the STATUS lamp is glowing. | |
The shaver cannot be charged. | Gently wipe the main body rear terminals and the charging terminals of the self‑cleaning recharger with a cloth or tissue dampened with water. |
Makes a loud sound. | During cleaning: The self‑cleaning recharger makes a loud sound due to the cleaning of the system outer foil. After cleaning: The self‑cleaning recharger makes a loud sound due to the removal of water droplets in order to speed drying. The sound after cleaning is different from the sound during cleaning. The water level has dropped and it is removing water droplets from the system outer foil after cleaning. This does not indicate a problem. |
Shaver | |
The power switch does not turn ON. | The appliance may not unlock depending on usage conditions. Place the appliance on the desk, then pick it up again. If it still does not operate, press and hold the power switch for more than 2 seconds to forcibly unlock the appliance. |
The clean lamp () glows. (It turns off in about 1 minute.) | Please clean the blades with the self‑cleaning recharger or the sonic vibration cleaning mode. |
The shaving sensor does not respond. | Depending on the beard thickness or the amount of beard trimmings in the shaver head, the shaving sensor may not react and the driving sound may not change. This is not abnormal. |
The shaving sensor may not respond depending on the type and quantity of the shaving gel. This is not abnormal. | |
The shaving sensor may not respond when the remaining battery capacity is low. If this happens, recharge the shaver. | |
Apply oil. The shaving sensor may not respond when there is not enough oil on the system outer foil. | |
The shaving sensor responds even though the shaver is not in contact with the skin. | Clean the beard trimmings from the shaver. Clean the system outer foil with the brush. When the shaver is extremely dirty, remove the foil frame and wash with water. |
Replace the system outer foil. Expected life of system outer foil: Approximately 18 months | |
Operating time is short even after a full charge. | Although the shaver can be used for about 2 weeks after a full charge (assuming dry‑shave usages for 3 minutes per day), the usable number of days might be lower depending on how the shaver is used (for example, when used for wet shaving). |
Apply oil. | |
Clean the shaver. | |
When the number of operations per charge starts to decrease, the battery is nearing the end of its life. | |
Shaver does not operate even after charging. | Use the appliance in an ambient temperature approximately 5°C (41°F) or higher. |
The battery has reached the end of its life. | |
The shaver will not operate with the AC adaptor connected. Please use the shaver after it has been sufficiently charged and the AC adaptor disconnected. | |
The driving sound changes while shaving. | The shaving sensor is operating. The sound changes depending on the beard thickness. |
Makes a loud sound. | Apply oil. The blades will not move smoothly when there is no oil on the system outer foil, requiring more power. |
The shaver makes a high‑pitched sound due to the linear motor drive. This does not indicate a problem. | |
Confirm that the system outer foil is properly attached. | |
Clean the system outer foil with the brush. Wash the system outer foil with water. | |
The odor is getting stronger. | Clean the shaver. |
System outer foil gets hot. | Apply oil. |
Replace the system outer foil if it is damaged or deformed. | |
You do not get as close a shave as before. | Clean the shaver. |
Apply oil. | |
Replace the system outer foil. Expected life of system outer foil: Approximately 18 months |
Power source | See the name plate on the AC adaptor. (Automatic voltage conversion) |
Motor voltage | 3.6 V |
Charging time | Approx. 1 hour |
This product is intended for household use only.
When using an electrical appliance, basic precautions are required to always be followed, including the following:
Read all instructions before using this appliance.
To reduce the risk of electric shock:
To reduce the risk of burns, fire, electric shock, or injury to persons:
Make sure to follow these instructions.
To prevent accidents, injuries or damage to property, please follow the instructions below.
Indicates a potential hazard that will result in serious injury or death. | |
Indicates a potential hazard that could result in serious injury or death. | |
Indicates a potential hazard that could result in minor injury or property damage. |
This symbol indicates prohibition. | |
This symbol indicates requirement that must be followed. |
This product | |
This product has a built-in rechargeable battery. Do not throw into fire, apply heat, or charge, use, or leave in a high temperature environment.
| |
Do not modify or repair.
| |
Never disassemble except when disposing of the product.
| |
In case of an abnormality or malfunction | |
Immediately stop using and disconnect the AC adaptor.
| |
Power supply | |
Do not connect or disconnect the adaptor to a household outlet with a wet hand.
| |
Do not immerse the AC adaptor and the selfcleaning recharger in water or wash with water. Do not place the AC adaptor and the selfcleaning recharger over or near water filled sink or bathtub. Never use the appliance if the AC adaptor is damaged or if the power plug fits loosely in a household outlet. Do not damage the cord or the power plug.
| |
Do not use in a way that would exceed the rating of the household outlet or the wiring.
| |
Use only the supplied AC adaptor and selfcleaning recharger with this product. Do not use the AC adaptor or self-cleaning recharger with any other product.
| |
Fully insert the power plug.
| |
Disconnect the AC adaptor when cleaning the main body with water.
| |
Regularly clean the power plug and the appliance plug to prevent dust from accumulating.
| |
Preventing accidents | |
Persons using an implanted medical electronic device, such as a pacemaker, should not allow this product to be in the vicinity of where the medical electronic device is implanted.
| |
Do not place within reach of children or infants. Do not let them use it.
| |
Do not use or store the self-cleaning recharger on top of other electrical devices.
| |
If detergent or oil is consumed accidentally, do not induce vomiting, drink a large amount of water and contact a physician. If detergent or oil comes into contact with eyes, wash immediately and thoroughly with running water and contact a physician.
| |
If detergent contacts skin, wash immediately and thoroughly with soap. If you experience skin irritation anywhere on the body, stop using immediately and contact a physician.
| |
Note the following precautions | |
The supply cord cannot be replaced. If the cord is damaged, the AC adaptor should be scrapped.
|
Protecting the skin | |
Do not use excessive pressure to apply the system outer foil to your lip or other part of your face. Do not apply the system outer foil directly to blemishes or injured skin.
| |
Do not forcefully press the system outer foil. Also, do not touch the system outer foil with fingers or nails when in use. Do not use this product for hair on head or any other part of the body.
| |
Do not remove the shaver from the selfcleaning recharger while using the "AUTO" mode or "Dry/Charge" mode.
| |
Check the system outer foil for cracks or deformations before use.
| |
Note the following precautions | |
Do not allow metal objects or trash to adhere to the power plug or the appliance plug.
| |
Do not share your shaver with your family or other people.
| |
Do not use detergent for any purpose other than washing the system outer foil.
| |
Disconnect the adaptor from the household outlet when not charging.
| |
Use caution when opening detergent as spout is sharp.
|
When using
About detergent
When storing
When cleaning
PRODUCT REGISTRATION
(U.S. customers only)
Go to www.panasonic.com/register and register your product now to receive these benefits:
Safety Notification
We contact our customers in case of recall
Owner Verification
Proof of purchase in case of product theft or loss
Efficient Warranty Service
In case there is a problem with your product
Special Offers and Promotions from Panasonic
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the ES-LS9A that isn't answered in the manual? Leave your question here.