Table of Contents
Advertisement
Identifying the Belt Guard
Look at the belt guard for your machine to determine
if it is an old style belt guard or a new style belt guard;
refer to
Figure
6.
Note:
A new style belt guard has a tab at the rear
corner of the guard.
1. Old-style belt guard
(without a tab)
Assembling the Guard Plate
Machines with an Old-Style Belt Guard
1.
Align the holes in the guard plate with the holes
in the belt guard as shown in
1. Flange-head bolt (5/16 x
1 inch)
2. Guard plate
2.
Assemble the plate to the guard with 2
flange-head bolts (5/16 x 1 inch) and 2 retaining
rings
(Figure
7).
Figure 6
2. New-style belt guard (with
a tab)
Figure
7.
Figure 7
3. Belt guard
4. Retaining ring
Assembling the Flange-head
Capscrews
Machines with a New-Style Belt Guard
1.
Assemble the flange head screw that you
removed in
through the hole in the belt guard as shown in
Figure
8.
g289099
1. Flange-head bolt (5/16 x
3/4 inch)
2. Belt guard
2.
Secure the bolt to the guard with a retaining ring
(Figure
8).
3.
Repeat steps
(Figure
8).
g289097
5
Removing the Belt Guard (page 4)
Figure 8
3. Retaining ring
1
and
2
for the other capscrew
g289102
Advertisement
Table of Contents
