Husqvarna PG 400 Petrol Operator's Manual page 11

3. Use a hammer to remove the diamond tools.
4. Attach new diamond tools on the tool plate.
5. Make sure that the diamond tool locking clip is
in working order and maintains pressure on the
diamond tool to keep it in place. Replace if loose
or damaged before starting the product.
883 - 004 - 20.12.2023
6. Put the product into operation position.
To connect a dust extractor
When dry grinding, use a Husqvarna dust extractor
Technical data on page 18 . Speak
system. Refer to
to your Husqvarna dealer for more information.
1. Connect the dust extractor to the product.
2. Make sure that the filters in the dust extractor are
clean and not damaged. Monitor the dust during the
operation.
Throttle control
The throttle control has 3 available positions:
• Stop position (A).
• Operation mode position (B).
• Start position/choke position (C).
11